Alcatel OneTouch POP C2 Quick Start Manual | Page 3

Alcatel OneTouch Mobile Phones Quick Start Manual - POP C2.
Download
Page  of 20
4.8, 1416 votes
background image

5

6

Getting started

1.2 

 Set-up

1.2.1 
Removing or installing the back cover

Inserting or removing the SIM card 

You must insert your SIM card to make phone calls. Please power off 
your phone before inserting or removing the SIM card.

SIM1

SIM2

Place the SIM card with the chip facing downwards and slide it into its 
housing. Make sure that it is correctly inserted. To remove the card, 
press and slide it out.

For dual SIM models, both SIM1 and SIM2 can support 2G and 3G 
networks, but when 3G SIM cards are inserted into both SIM1 and 
SIM2 slot at the same time, either of the SIM1 or SIM2 slot will 
support 3G network.

  Your phone only supports mini SIM card. Do not attempt to 

insert other SIM types like micro and nano cards, otherwise 
this may cause damage to your phone.

Installing or removing the battery

Please power off your phone before removing the battery.

Insert and click the battery into place, then close the cover.

• 

Unclip the cover, then remove the battery.

• 

Installing the microSD card

To install, please open microSD card lock first, and then place the 
external microSD card into the slot with the gold contact facing 
down. To remove the external microSD card, please open microSD 
card lock and take it out from the slot.

Charging the battery

Connect the battery charger to your phone and mains socket 
respectively.  

  The charging status bar will not float if your battery is 

extendly consumed. To reduce power consumption and 
energy waste, when battery is fully charged, disconnect your 
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or 
background-running applications when not in use; reduce 
the backlight time, etc.

IP4909_4032D_QG_Eng_GB_India & Sri Lanka_02_140617.indd   5-6

IP4909_4032D_QG_Eng_GB_India & Sri Lanka_02_140617.indd   5-6

2014-6-17   17:44:10

2014-6-17   17:44:10

0.506209s