Canon EF-M 18-55mm f3.5-5.6 IS STM Owner's Manual

Canon Cameras Owner's Manual - EF-M 18-55mm f3.5-5.6 IS STM.
Download
Page  of 2
4.7, 1036 votes
background image

ENG-1

Wide end

Telephoto end

Zoom ring

ENG

 EF-M LENS Instructions

EF-M18-55mm f/3.5-5.6 IS STM

Nomenclature

① Focusing ring

② Hood mount

③ Filter Mounting Thread

④ Lens mount index

⑤ Contacts

⑥ Zoom position index

⑦ Zoom ring

Thank you for purchasing a Canon product.

The Canon EF-M18-55mm f/3.5-5.6 IS STM lens is a 3x 

standard zoom lens developed for interchangeable-lens digital 

cameras compatible with EF-M lenses*.

*  Only the fol owing cameras are compatible with EF-M lenses (as 

of July 2012): 

EOS M

•  "IS" stands for Image Stabilizer.

•  "STM" stands for stepping motor.

 Safety Precautions

•  Do not look at the sun or a bright light source through the 

lens. Doing so could result in vision loss or blindness.

•  Whether it is attached to the camera or not, do not leave 

the lens under the sun without the lens cap attached. This 

is to prevent the lens from concentrating the sun’s rays, which 

could cause a fire.

Handling Cautions
•  If the lens is taken from a cold environment into a warm 

one, condensation may develop on the lens surface and 

internal parts. To prevent condensation in this case, first 

put the lens into an airtight plastic bag before taking it from a 

cold to warm environment. Then take out the lens after it has 

warmed gradually. Do the same when taking the lens from a 

warm environment into a cold one.

•  Do not leave the lens in excessive heat such as in a car in 

direct sunlight. 

High temperatures can cause the lens to 

malfunction.

•  Please also refer to the handling cautions found in your 

camera’s instructions.

Conventions used in this instruction

  Warning to prevent lens or camera malfunction or 

damage.

  Supplementary notes on using the lens and taking 

pictures.

This device complies with Part 15 of the FCC Rules. Operation is 

subject to the following two conditions: (1) This device may not cause 

harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless 

otherwise specified in the instructions. If such changes or modifications 

should be made, you could be required to stop operation of the 

equipment.

This equipment has been tested and found to comply with the limits for 

a class B digital device, pursuant to part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential instal ation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used 

in accordance with the instructions, may cause harmful interference to 

radio communications.

However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
1. Mounting and Detaching the Lens

See your camera’s instructions for details on mounting and 

detaching the lens.

• After detaching the lens, place the lens with the rear end 

up to prevent the lens surface and contacts from getting 

scratched. (fig.❶)

• If the contacts get soiled, scratched, or have fingerprints on 

them, corrosion or faulty connections can result. The camera 

and lens may not operate properly.

• If the contacts get soiled or have fingerprints on them, clean 

them with a soft cloth.

• If you remove the lens, cover it with the dust cap. To attach 

it properly, align the lens mount index and the  index of the 

dust cap as shown in the diagram, and turn clockwise. (fig.❷) 

To remove it, reverse the order.

2. Zooming

Turn the lens’ zoom ring to adjust the size of the photo field or 

subject. (fig.❸)
•  For wide shots, turn the zoom ring toward the wide end.

•  For close-ups, turn the zoom ring toward the telephoto end.

• Be sure to finish zooming before focusing. Zooming after 

focusing can affect the focus.

• Blurring may temporarily occur if the zoom ring is quickly 

rotated.

• Zooming during still image exposure will result in delayed 

focus. This causes any streaks of light that are captured 

during exposure to be blurred.

3. Manual Focus

When the camera’s focus mode is set to [MF], focus manually by 

turning the focusing ring (fig.❹).

Quickly rotating the focusing ring may result in delayed focus.

• Focus mode is set using the camera. Please refer to the 

camera’s instructions.

• After autofocusing in [AF+MF] mode, focus manually by 

pressing the shutter button halfway and turning the focusing 

ring (full-time manual focusing).

4. Image Stabilizer

This lens is equipped with an Image Stabilizer. This function 

corrects camera shake, allowing users to capture sharp images. 

Also, the Image Stabilizer automatically provides optimal image 

stabilization depending on shooting conditions (such as shooting 

still subjects and following shots). Please set the Image Stabilizer 

ON or OFF using the camera settings. See your camera’s 

instructions for details.

• The Image Stabilizer cannot compensate for a blurred shot 

caused by a subject that moved.

• The Image Stabilizer may not be fully effective if you shoot 

from a violently shaking vehicle or other transportation.

• The Image Stabilizer consumes more power than normal 

shooting, so fewer shots can be taken if you use the 

function.

• When shooting a still subject, it compensates for camera 

shake in all directions.

• It compensates for vertical camera shake during following 

shots in a horizontal direction, and compensates for 

horizontal camera shake during following shots in a vertical 

direction.

• When you use a tripod, the Image Stabilizer should be 

turned off to save battery power.

• Even with a monopod, the Image Stabilizer will be as 

effective as during hand-held shooting. 

However, depending on the shooting environment, the 

Image Stabilizer effect may be less effective.

■ Dynamic IS Function (Movie shooting only)

The EF-M18-55mm f/3.5-5.6 IS STM is equipped with dynamic IS, 

ef ective when shooting while walking since it expands the IS range.
•  Achieves effective IS at the wide end.

•  Automatically activates when the camera is set to Movie 

Shooting.

CT1-8583-001

COP

Y

0.533501s