Canon imageRUNNER ADVANCE 6065 Quick Setup Guide

Canon B/W imageRUNNER ADVANCE Quick Setup Guide - imageRUNNER ADVANCE 6065.
Download
Page  of 2
4.8, 1666 votes
background image

Voice Operation Quick Guide - Using the Voice Navigation Mode

The Voice Navigation mode enables you to hear Voice Navigation instructions when operating 
your multifunctional imageRUNNER ADVANCE (hereinafter referred to as "the machine"). 
The Voice Navigation mode also includes a voice recognition function, which enables you to 
set the various functions of the machine using your own voice.

Before You Start Using This Product

• Confirm that the main power 

of the machine is turned 
ON. For more information, 
see the instruction manuals 
that came with the machine.

• Confirm that the voice unit 

is attached to the machine.

• Make sure that you are on 

the Regular Copy Basic 
Features screen.

NOTE

For information on operating the machine in the Voice Navigation mode, see the Voice 
Operation Kit User's Guide
.

Using the Voice Navigation Mode

Starting the Voice Navigation Mode
Press and hold 

(Reset) or the Voice 

Recognition button for more than five 
seconds.

NOTE

If an external switch is installed, press and hold the 
external switch for more than five seconds to start 
the Voice Navigation mode.

Select the desired Voice Navigation 

mode 

 press [OK].

[Manual + Vocal Mode]: Enables you to hear 
Voice Navigation instructions from the 
machine, as well as control the machine 
using your own voice.
[Vocal Mode]: Enables you to operate the 
machine using your own voice. Perform the 
necessary preparations for making copies, 
such as placing your originals.
[Manual Mode]: Enables you to hear Voice Navigation instructions from the 
machine while operating the machine from the control panel.

Microphone

Speaker

Voice Recognition Button

Volume Adjustment Switches

NOTE

• You can also select the desired Voice Navigation mode by pressing the Voice 

Recognition button, and saying the name of the desired mode.

• You can set the machine to automatically start the Manual and Vocal mode, Manual 

mode, or Vocal mode, instead of displaying the Voice Navigation Selection screen. 
For more information, see the Voice Operation Kit User's Guide.

Stopping the Voice Navigation Mode

Press and hold 

 (Reset) or the Voice Recognition button for 

more than five seconds.

NOTE

If an external switch is installed, press and hold the external switch for more than five 
seconds to stop the Voice Navigation mode.

Voice Recognition

Press the Voice Recognition button 

 

say the desired voice command clearly 
after the tone.
If an external switch is installed, press the 
external switch instead of the Voice 
Recognition button.
You will hear a message corresponding to the 
command you said, and the command is 
executed.

IMPORTANT

• If you are not sure which words are recognizable, say "voice command list" to dis-

play the Voice Command List screen. (See "Voice Command List," on the back of 
this guide.)

• Voice commands cannot be recognized while the Voice Command List is displayed.
• Say your command clearly and at a distance of no more than 5 7/8" (15 cm) away 

from the microphone.

• Do not touch the black tip of the microphone when you speak into it. Touching the 

black tip may cause interference, and result in your voice not being recognized.

• Say your command after you press the Voice Recognition button, and hear the tone. 

If you say your command before you hear the tone, it will not be recognized.

• Say "voice command list" to display a list of the recognizable phrases and how to 

pronounce them on the touch panel display.

• The success rate of recognition may vary, according to your voice and your 

surroundings.

• Even if you say a recognizable word, it may not be recognized if you say filler words 

before or after the command, such as "um ...," or "please."

• It is not necessary to break up words into syllables when saying them.
• If you do not say anything for a certain period of time after pressing the Voice 

Recognition button, recognition will be canceled (as voice recognition has timed 
out). Press the Voice Recognition button, wait for the tone, and then say your 
command again.

NOTE

Confirm your settings before copying.

beep

Related Manuals for Canon imageRUNNER ADVANCE 6065

0.655290s