Canon PIXMA MP140 User's Manual

Canon All in One Printer User's Manual - PIXMA MP140.
Download
Page  of 2
4.3, 1337 votes
background image

Start Here

Easy Setup Instructions

 Note

When moving the machine, carry the machine at both ends as shown below. Do not lift 

the machine by grasping the Paper Support Extension or the Operation Panel.

a

Placethemachineonaflatandhorizontalsurface,anddonot

place any objects in front of the machine.

b

Lift the Scanning Unit (Printer Cover), then remove the 

Protective Material on the right side.

Protective Material

 Caution

Before turning on the machine, remove all of the shipping tapes.

c

Close the Scanning Unit (Printer Cover).

1 Prepare the Machine

d

Plug the Power Cord in the back of the machine and connect the 

other end to the wall outlet.

Power Cord

 Note

Do not connect the USB cable at this stage.

e

Press the 

ON/OFF button to turn on the machine. The machine 

willinitialize.Waituntilthe

POWERlampstopsflashingand

remains lit green.

f

Lift the Scanning Unit (Printer Cover) and pull the Scanning 

Unit Support down into place. The FINE Cartridge Holder 

automatically moves to the left.

The FINE 

Cartridge Holder 

moves to the left.

Install the FINE 

Cartridges here.

gWrite down the Serial Number located inside the machine. You 

will need this to register your product.

Serial Number

2 Install the FINE Cartridges
a

 Remove the Black FINE Cartridge from its box.

b

 Remove the Protective Tape gently.

Protective Tape

PrintHeadNozzles

Electrical Contacts

 Important

Do not touch the Electrical Contacts or Print Head Nozzles on a FINE Cartridge. 

The machine may not print out properly if you touch it.

Do not reattach the Protective Tape once you have removed it.

Be careful not to stain your hands or surrounding work area with ink on the 

removed Protective Tape.

c

 Insert the Black FINE Cartridge slightly slanted into the left slot  

B

.

B

d

 Push up the FINE Cartridge until it clicks into place.

 Important

For correct machine operation, make sure the FINE Cartridge is secure in slots.

e

 Repeat the procedure for the Color FINE Cartridge, inserting it 

into the right slot  C .

C

f

 Lift the Scanning Unit (Printer Cover) to put the Scanning Unit 

Support back to its original position, then close the Scanning 

Unit (Printer Cover).

 Important

Once you have installed the FINE Cartridges, the LED will flash green. Wait for 

about one to two minutes, until the LED stops flashing and displays 1 and the 

machine has stopped making operating noises, before proceeding.

Hardware setup is complete.

Unpack the Machine

Pleaseconfirmtheincludeditemsagainsttheillustrationprintedonthelidofthepackingbox.

A USB cable is necessary to connect the machine with your computer.

Photo All-in-One

Related Manuals for Canon PIXMA MP140

0.496476s