Carrier ENERGY / HEAT RECOVERY VENTILATOR ERVCCSVB1100 User's Manual

Carrier Ventilation Hood User's Manual - ENERGY / HEAT RECOVERY VENTILATOR ERVCCSVB1100.
Download
Page  of 14
4.3, 2255 votes
background image

ERVCCSVB1100, ERVCCSHB1100

HRVCCSVB1100, HRVCCSHB1100

Energy / Heat Recovery Ventilator

Installation Instructions

NOTE: Read the entire instruction manual before starting the
installation.

TABLE OF CONTENTS

PAGE

SAFETY CONSIDERATIONS

1

. . . . . . . . . . . . . . . . . . . . . . . . .

INTRODUCTION

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSTALLATION CONSIDERATIONS

2

. . . . . . . . . . . . . . . . . . .

COMPONENT DESCRIPTION

2

. . . . . . . . . . . . . . . . . . . . . . . .

UNIT INSTALLATION

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WALL CONTROL

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OPERATING THE ERV/HRV WITH
THE INFINITY CONTROL

6

. . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL CONNECTIONS

6

. . . . . . . . . . . . . . . . . . . . . . . .

ACCESSORIES

6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BALANCING ERV/HRV

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VENTILATION EVALUATION

8

. . . . . . . . . . . . . . . . . . . . . . . .

CONTROL BOARD OPERATION

8

. . . . . . . . . . . . . . . . . . . . . .

CARE AND MAINTENANCE

8

. . . . . . . . . . . . . . . . . . . . . . . . .

TROUBLESHOOTING

9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Fresh air to building port
2. Exhaust air from building port
3. Fresh air from outside port
4. Exhaust air to outside port

A08103

Fig. 1 - ERV/HRV Unit (Top Port)

A05330

Fig. 2 - ERV/HRV Unit (Side Port)

SAFETY CONSIDERATIONS

Improper installation, adjustment, alteration, service, maintenance,
or use can cause explosion, fire, electrical shock, or other

conditions which may cause death, personal injury or property
damage. Consult a qualified installer, service agency, or your

distributor or branch for information or assistance. The qualified
installer or agency must use factory- authorized kits or accessories

when modifying this product. Refer to the individual instructions

packaged with kits or accessories when installing.
Follow all safety codes. Wear safety glasses, protective clothing

and work gloves. Have a fire extinguisher available. Read these
instructions thoroughly and follow all warnings or cautions

included in literature and attached to the unit. Consult local

building codes and the current editions of the National Electrical
Code (NEC) NFPA 70.
In Canada, refer to the current editions of the Canadian Electrical
Code CSA C22.1.

Recognize safety information. This is the safety- alert symbol

.

When you see this symbol on the unit and in instruction manuals,
be alert to the potential for personal injury.
Understand the signal words DANGERWARNING, and

CAUTION. These words are used with the safety- alert symbol.

DANGER identifies the most serious hazards which will result in

severe personal injury or death. WARNING signifies hazards
which could result in personal injury or death. CAUTION is used

to identify unsafe practices which may result in minor personal
injury or product and property damage. NOTE is used to highlight

suggestions which will result in enhanced installation, reliability, or

operation.

Related Manuals for Carrier ENERGY / HEAT RECOVERY VENTILATOR ERVCCSVB1100

0.487396s