Carvin S400 Owner's Manual

Carvin Audio Owner's Manual - S400.
Download
Page  of 4
4.9, 1474 votes
background image

Congratulations on your purchase of the StageMate™.  We’ve included all the great

features of a full PA system into the compact portable size of the StageMate™.  Then
we added BATTERY POWER to make the StageMate™ work anywhere.  Plus, with the
“D” option model you get 256 24-BIT Digital Effects from chorus to reverb to echoes.  

The StageMate™ is well suited for set-up anywhere. Use it at events like parties, picnics,

club meetings, weddings, church gatherings, company functions, auctions, parades,
county fairs, aerobics clubs, soccer, baseball, football, camping & beach events for qual-
ity announcements & music.

RECEIVING INSPECTION—read before getting started

INSPECT YOUR UNIT FOR ANY DAMAGE which may have occurred during shipping.

If any damage is found, please notify the shipping company and CARVIN immediately. 

SAVE THE CARTON & ALL PACKING MATERIALS.  In the event you have to re-ship your

unit, always use the original carton and packing material. This will provide the best pos-
sible protection during shipment.  CARVIN and the shipping company are not liable for
any damage caused by improper packing.  

SAVE YOUR INVOICE.  It will be required for warranty service if needed in the future. 
SHIPMENT SHORTAGE.  If you find items missing, they may have been shipped sep-

arately.  Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual

for your records.  Keep your portion of the card and return the portion with your name
and comments to us.

SERVICE:  In  the USA, please call 800-854-2235 for a RMA # (return authorization

number).  Write this number on the box and enclose a description of the problem.  Prepay
to Carvin 12340 World Trade Drive, SD, CA   92128.

Outside the USA, contact your dealer or go to http://www.carvinworld.com for your

nearest service center. Include a written description of the problem with serial number
and date of purchase.

STAGEMATE™ SPECIFICATIONS:

Frequency Response:

Mic or Line Inputs: 20Hz-20KHz ±2dB

Total Harmonic Distortion:

Less than 1%

Output Power:

60 Watts RMS @ 8ohms 
100 Watts RMS @ 4ohms (with 8 ohm extension speaker)

Channel 1:

3 band active
LOW:  80Hz ±15dB
MID: 750Hz ±15dB 
HI:  10KHz ±15dB

Channel 2-4:

2 band active,
LOW:  80Hz ±15dB
HI:  10kHz ±15dB

Effects loop send & return:

1/4” Phone Jack

Tape / CD inputs:

Dual RCA jacks

Cabinet Freq Resp:

85 -16.5k Hz

Power Requirements:

150VA @ 120VAC, 12VDC @ 8 amps 

Size & Weight:

12.75Wx11.5Dx18.5H, 34lbs. 

76-00400 C   0705

For your records, you may wish to record the following information.

Serial No._____________________  Invoice Date_______________

CONNECTING AND USING AC POWER
•  Connect the StageMate™ to a standard AC power outlet.   
•  Use only a grounded (3 prong) power outlet to prevent a shock hazard.  This also gives

the quietest grounding.

OPERATING IN BATTERY MODE 
•   The StageMate™ charges its battery using AC power.  If the Battery Status LED indicates

a low or dead battery, plug the StageMate™ into AC power and turn the power switch
“ON”.  Usual charging time is approximately 8 hours (with dual batteries 16 hours). 

CONNECTING INPUTS TO YOUR STAGEMATE™
•  Channel 1 is designed for acoustic and electric guitars using a 1/4” phone shielded cable.   
•  Channels 2 through 4 are microphone & instrument inputs.  Plug a microphone into the

balanced XLR MIC input using an XLR shielded microphone cable and a 1/4” shielded
cable from your instruments.  Both can be used at the same time.

TURNING ON YOUR STAGEMATE™
•  Adjust all channel level controls to their off position (full counter clockwise).
•  Adjust all “EQ” tone controls to their center detent position.
•  Adjust all channel EFF controls to their off position.
•  Turn the StageMate™ on by the power switch and watch for the power LED to come on. 
•  Plug in your instruments and microphones into the appropriate channels, and adjust the

level controls to the desired playing volumes.  (For detail on the individual channel tone
controls and battery charging, see the appropriate sections in this manual.) 

CARVIN ENGINEERING DATA

OPERATING MANUAL

S400 & S400D StageMate™ Battery PA

THREE BAND 

CHANNEL TONE 

CONTROLS

MID

LOW

LEVEL

EFFECTS 1

 

SEND

TAPE /CD

CHANNEL 1

RIGHT

LEFT

HI

EFF

INST

ACOUSTIC

INTERNAL

POWER 

AMP

MASTER LEVEL

INTERNAL

DIGITAL

EFFECTS

MASTER

EFF

LIMITER

INTERNAL

SPEAKERS

HEADPHONE

OUTPUT

PAD

LINE OUT

RETURN

EXT 

SPK

CHANNEL TONE 

CONTROLS

PAD

LOW

MIC
PRE

LEVEL

CHANNELS  2 - 
4

line pad
(-11dB)

HI

EFF

MIC

LINE

EFFECTS

LEVEL

EFFECTS

FOOTSWITCH

StageMate™ Block Diagram

• 100 Watts
• Battery Powered
• AC Powered

S400
S400D (with sound effects)

Note: Unit must be charged before use.  
If unit is intermittent,recharge for 8 hours.

810

8

Ω 200W extension speaker

FS22

Remote footswitch for effects

SS20

Speaker Stand

CM50 

Professional mic

MS12

Mic Stand

C25

25’ 12V auto power cable

CV400

S400 vinyl cover

B400

To double your battery time, install a 
second B400 (use as replacement)

OPTIONS:

B400
Replacement battery

FS22  Footswitch for effects 

C25  25’ 12V auto cable

OPTIONS:

0.632302s