Chamberlain 377LM User's Manual
FEATURES
For use with any 315 MHz SECURITY✚® garage door openers
having a purple “learn” button.
Personalized Password: Up to 10,000 possible combinations.
Password can be easily changed if desired.
Temporary Password: Can be added for visitors or service
persons. This temporary password can be limited to a
programmable number of hours or a programmable number of
entries.
Rolling Code: While your password remains constant until you
change it, the code between the Keyless Entry and the receiver
changes with each use, randomly accessing over 100 billion
new codes.
Operation: Opener activates when 4-digit password and
ENTER button is pressed.
If wrong numbers are accidentally pressed, correction can be
made immediately. The ENTER button will transmit only the last
four digits.
The keypad will blink for 15 seconds after the password is
transmitted. During that time the ENTER button can be used to
stop or reverse the door travel.
The Lock feature on openers with Multi-Function Door Controls
is designed to prevent operation of the door from portable
transmitters. However, the door will open and close from the
door control push button and the Keyless Entry.
One Button Close: Opener can be closed by pressing only the
ENTER button if the one button close feature has been
activated. This feature has been activated at the factory. To
activate or deactivate this feature press and hold buttons 1 and
9 for 10 seconds. The keypad will blink twice when the one
button close is active. The keypad will blink four times when one
button close is deactivated.
1
Models 377LM, 377LMC
315 MHz Security✚®
Wireless Keyless Entry
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• Install Keyless Entry Control within sight of the garage door, out of
reach of children at a minimum height of 5 feet (1.5 m), and away
from all moving parts of door.
• ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
WARNING
CAUTION
WARNING
WARNING
1. Enter a four digit personal identification
number (PIN) of your choice on the keypad.
Then press and hold ENTER.
2. While holding the ENTER button, press and
hold the LIGHT button on the Multi-Function
Door Control.
3. Continue holding the ENTER and LIGHT
buttons while you press the push bar on the
Multi-Function Door Control (all three buttons
are held).
4. Release buttons when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
1. Press and release the “learn” button on motor
unit. The learn indicator light will glow
steadily for 30 seconds.
2. Within 30 seconds, enter a four digit personal
identification number (PIN) of your choice on
the keypad. Then press and hold the ENTER
button.
3. Release the button when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
LOCK
LIGHT
SETTING THE PERSONAL ENTRY PASSWORD
We recommend that you install the battery and program
the Keyless Entry now, prior to installation. Then you can
test the reception at the mounting location before you
proceed further.
USING THE “LEARN” BUTTON
USING THE MULTI-FUNCTION DOOR CONTROL
Side two contains instructions for installing the Keyless
Entry, changing the personal entry password and setting a
temporary password.
LOCK
LIGHT
LOCK
LIGHT
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Related Manuals for Chamberlain 377LM
-
Alarm Lock Security System TRILOGY DL2700 Programming Instructions Manual
12 pages
-
Alarm Lock Security System Trilogy PDL3000 Programming Instructions Manual
36 pages
-
Heath Zenith Security System SL-5411 User's Manual
12 pages
-
Honeywell Security System ADEMCO LYNXR Series Setup Guide
72 pages
-
Smarthome Security System POWERHOUSE PS561 Owner's Manual
33 pages
-
Swann Security System SW347-WA2 Operation Manual
20 pages
-
Emerson Security System FM-3 Programming Module User's Manual
60 pages
-
Emerson Security System MICRO MOTION F-SERIES SENSOR User's Manual
26 pages
-
Harbor Freight Tools Security System 91851 User's Manual
10 pages
-
Chamberlain Security System SECURITY 4620 User's Manual
40 pages
-
LG Security System IrisAccess 3000 User's Manual
1 pages
-
First Alert Security System FA 1600C/CA/CB User's Manual
80 pages
-
First Alert Security System FA1220CV User's Manual
60 pages
-
First Alert Security System FA130CP User's Manual
56 pages
-
First Alert Security System First Alert Home Security System FA210RF User's Manual
1 pages
-
JVC Security System UX-5000 User's Manual
21 pages
-
Swann Security System ADW-200 User's Manual
12 pages
-
Q-See Security System QPSCDNV Technical Manual
2 pages
-
Code Alarm Security System CA-530 Owner's Manual
11 pages
-
Bunker Hill Security Security System 62368 Owner's Manual
15 pages
-
C&K systems Security System LED Keypad User Manual
40 pages
-
C&K systems Security System Sierra S5030 Technical Manual
68 pages
-
C&K systems Security System System 2316 User Manual
1 pages
-
Bunker Hill Security Security System 62368 Owner's manual & safety instructions
20 pages