Chamberlain 995LM User's Manual

Chamberlain Work Light User's Manual - 995LM.
Download
Page  of 2
4.4, 2148 votes
background image

To prevent possible SERIOUS INJURY or DEATH from electrocution
or fire, the light control is ONLY for indoor use.

WARNING

CAUTION

WARNING

WARNING

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

RATING

Resistive Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Amps
Motor Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/3 HP
Incandescent Lamp  . . . . . . . . . . . . . . . . . . . . . . . .600 Watts

The Remote Light Control is designed to operate lights
according to the rating chart shown. Please read the
instructions and power limitations carefully to ensure proper use
and maximum safety. NOT recommended for use with toasters,
coffee pots, florescent or halogen lighting systems.

This Light Control can be operated by Model 900 Series
portable remote controls and Keyless Entries.

The Remote Light Control receiver needs to learn the
remote control code. Follow the instructions below:

• Plug the light control into a 120Vac polarized outlet. The plug

contacts are designed for polarized outlets only. 

• Press and release the “learn” button on the Light Control with

a pen or pencil tip. The learn indicator
light will glow steadily for 30 seconds.

•  Within 30 seconds, press and hold the

button on the hand-held remote. 

•  Release the remote control push button.

Code setting is now complete. 

The remote control push button must be held down until the
receiver indicator light flashes for the light control to learn the
remote control's code.

ERASING CODES

If the receiver LEARN button is pressed and held until the
yellow indicator light alongside goes out (in about 6 seconds), 
all memorized codes will be erased.

OPERATING INSTRUCTIONS

If two or more light controls are installed, they must be located
at least 10 feet apart to prevent electronic interference.

•  First, plug the lamp into a wall outlet and turn it ON.

• With the lamp still in the ON position, plug it into polarized

outlet on the light control. Plug the Light Control into a 120Vac
polarized outlet. The bulb will not light.

• TO TEST: Press and release the light control actuator. The

light should turn ON. Press the remote control push button.
The light should turn OFF.

If the remote control does not activate the light, check to be sure:

• You are pressing the remote control push button selected to

operate the light control.

• The remote control battery has power. Refer to the remote

control instructions for battery changing information.

Select a 
push button

NOTICE:  To  comply  with  FCC  and/or  Industry  Canada  (IC)  rules,  adjustment  or
modifications  of  this  receiver  and/or  transmitter  are  prohibited,  except  for  changing  the
code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. 

Pour éviter les risques de BLESSURE GRAVE ou de MORT causés
par l’électrocution ou l’incendie, la commande d’éclairage doit être
utilisée UNIQUEMENT pour l’intérieur.

WARNING

CAUTION

WARNING

WARNING

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

Model 995LM Security

✚ Remote Light Control 

Modèle N° 995LM Security

✚ Télecommande d’eclairage

Modelo 995LM Security

✚ Control Remoto de luz 

Para prevenir LESIONES GRAVES O LA MUERTE posibles de
electrocución o incendio, el control de luz es para uso interior
SOLAMENTE.

PRECAUCIÓN

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

Learn Button 
Bouton LEARN
Botón "APRENDER" (Learn)

Learn Indicator Light 
Voyant indicateur d’apprentissage
Luz indicadora de aprendizaje

Light Control Actuator  
Commutateur de commande d’éclairage
Actuador de control de luz 

Antenna 
Antenne 
Antena 

OWNER’S INSTRUCTIONS

ENGLISH

Related Manuals for Chamberlain 995LM

0.483830s