Epson 1000 ICS User's Manual

Epson All in One Printer User's Manual - 1000 ICS.
Download
Page  of 2
4.2, 2257 votes
background image

EPSON

®

1000 ICS

Unpack Your
EPSON 1000 ICS 

Unpack Y

Attach the
Paper Support

Attach the
P

1

Press the release button on the right side, then lift up the scanner, as shown.

2

Peel off the tape and remove the plastic piece from the front of the ink cartridge holders.
Remove the packing tape from the transportation lock.

3

Slide the transportation lock to the left.

4

Carefully lower the scanner back down into place.

Turn over

1

2

3

5

1

Make sure you have all the parts shown here. If any parts are missing,
contact EPSON as described in your Basics 
book. 

You’ll also need a USB cable (not included) to connect
the EPSON 1000 ICS to your computer.

2

Remove any tape and packing materials, as shown.

Note: There may be additional packing materials or tape in locations
different from the ones shown in these illustrations. Do not remove
the sticker covering the USB port.

Release the
Transportation Lock

Release the
Tr

Plug In Your
EPSON 1000 ICS

Plug In Y

4

Install the
Ink Cartridges

1

Press the      Operate button. The      Operate light comes on and the
scanner carriage and print head move.

2

Press the release button on the right side, then lift up the scanner.

3

Unwrap the ink cartridges and remove the yellow tape.

4

Lift up the ink cartridge
clamps.

5

Insert the ink cartridges with
the labels face-up.

6

Press down the ink cartridge
clamps until they snap shut.

7

Carefully lower the scanner back down into place.

8

Press the      Copy button to begin charging the ink delivery system.

Charging takes about two minutes.
The     Operate light flashes and
the EPSON 1000 ICS makes various
sounds. Don’t turn it off while the

Operate light is flashing or you’ll

waste ink. 

Operate button

Warning: Keep ink cartridges out of the
reach of children. If ink gets on your skin,
wash the area thoroughly with soap and
water. If ink gets in your eyes, flush them
immediately with water.

Caution: Don’t open the clamps to remove a cartridge except to replace it with a
new one. Once you remove a cartridge, you can’t reuse it, even if it contains ink.
You must install both cartridges and leave them installed for all types of printing.
To avoid damaging the EPSON 1000 ICS, never move the print head by hand.

Insert the paper support into its three slots.

Plug the EPSON 1000 ICS into a grounded electrical outlet.
Do not connect the USB cable yet.

Start 

Here

Start 

Her

Do not remove
sticker from USB
port.

Related Manuals for Epson 1000 ICS

0.506029s