Epson AcuLaser F CX11N User's Manual

Epson All in One Printer User's Manual - AcuLaser F CX11N.
Download
Page  of 6
4.8, 2486 votes
background image

Setting Your AcuLaser CX11NF to Receive 
Faxes

By default your Epson AcuLaser® CX11NF is set to receive distinctive 
ring pattern telephone calls. This may prevent the AcuLaser CX11NF 
from receiving incoming faxes. 

If your AcuLaser CX11NF does not pick up a telephone or fax call, 
follow these steps to change the DRPD (Distinctive Ring Pattern 
Detection) setting: 

1. Press the 

Setup

 button.

The Setup light turns on and the LCD screen displays Setup 
Mode for a few seconds, and then changes to the Setup menu.

2. Press the d button twice to select Fax Settings. Then press the r 

button

3. Press the d button twice to select Reception Settings. Then 

press the r button.

4. Press the d button three times to select DRPD. Then press the r 

button.

5. Press the u button to select ALL. Then press the r button

DRPD is set to ALL.

6. Press the 

Setup

 button to exit the menu.

Your telephone company can add a second telephone number to your 
main telephone line that will ring with a distinctive pattern. DRPD 
allows the AcuLaser CX11NF to distinguish between different ring 
patterns. When DRPD is set to NORMAL, the AcuLaser CX11NF 
will only answer the distinctive ring and ignore the one regular ring.

© 2005 Epson America, Inc. 7/05

CPD-20347

Printed in USA

Setting Your AcuLaser CX11NF to Receive 
Faxes

By default your Epson AcuLaser® CX11NF is set to receive distinctive 
ring pattern telephone calls. This may prevent the AcuLaser CX11NF 
from receiving incoming faxes. 

If your AcuLaser CX11NF does not pick up a telephone or fax call, 
follow these steps to change the DRPD (Distinctive Ring Pattern 
Detection) setting: 

1. Press the 

Setup

 button.

The Setup light turns on and the LCD screen displays Setup 
Mode for a few seconds, and then changes to the Setup menu.

2. Press the d button twice to select Fax Settings. Then press the r 

button

3. Press the d button twice to select Reception Settings. Then 

press the r button.

4. Press the d button three times to select DRPD. Then press the r 

button.

5. Press the u button to select ALL. Then press the r button

DRPD is set to ALL.

6. Press the 

Setup

 button to exit the menu.

Your telephone company can add a second telephone number to your 
main telephone line that will ring with a distinctive pattern. DRPD 
allows the AcuLaser CX11NF to distinguish between different ring 
patterns. When DRPD is set to NORMAL, the AcuLaser CX11NF 
will only answer the distinctive ring and ignore the one regular ring.

© 2005 Epson America, Inc. 7/05

CPD-20347

Printed in USA

Related Manuals for Epson AcuLaser F CX11N

0.592322s