Epson Epson ActionLaser 1000 Printer Product Support Bulletin

Epson Laser Printer Product Support Bulletin - Epson ActionLaser 1000 Printer.
Download
Page  of 8
4.3, 2243 votes
background image

EPSON AMERICA INC.

EPSON

Product Support Bulletin

Subject: New ActionLaser 1000/1500 Imaging Cartridge Replacement Procedure

Date: 6/4/93

PSB No: P-0100

Page(s): 1 of 2

Originator: LHT

This bulletin provides supplemental information to resolve a situation when printed

images become faint, SelecType Level 2 TONER message indicating that the

toner amount is low (E*

F), and three messages flash in rotation on the LCD:

NEW CARTRIDGE?

YES, PRESS RESET
NO, PRESS CONTINUE.

After the instructions to replace the imaging cartridge (as shown on pages 3-29
through 3-32 of the ActionLaser 1000/1500 Reference Guide) has been followed,
some printers may continue to display the above messages. 

This condition does

not affect printer operation or print quality in any way. It can be corrected by
resetting the printer as described below:

NOTE:

Resetting clears all the saved SelecType information but the status
sheet printed in step 3 shows the current settings.

1. Press the LEVEL 1 button to enter SelecType Level 1.

2. Press CONTINUE 

 button until STATUS SHEET appears on the display.

3. Press INITIALIZE   RESET 

 button twice to print a status sheet.

4. Save the status sheet for future reference, then turn off the printer.

5. Press and hold down the ON LINE, CONTINUE 

 and FEED 

 buttons

while you turn on the printer and keep pressing the buttons until the following
message appears:

STARTUP ERROR LT<>A4

When the above message appears, release the buttons.

0.603454s