Epson Epson B-510DN Business Color Inkjet Printer Start Here Guide

Epson Inkjet Printers Start Here Guide - Epson B-510DN Business Color Inkjet Printer.
Download
Page  of 4
4.4, 1967 votes
background image

B-310N/B-510DN

Before using the printer, make sure you read the safety instructions in the 
User’s Guide

 on your printer CD.

Start Here

Unpack

If anything is missing, contact Epson as described on the back of this sheet.

The following instructions apply to both the B-310N and B-510DN, unless 
otherwise noted.

Note: The appearance of your printer may differ from what you see here, 

depending on your model and accessories.

Remove all the tape and other packing material, including tape on the 
duplexer at the back of the printer (B-510DN only). Insert the paper cassette 
into the printer.

1

Load paper in the rear  

sheet feeder

1  Open the paper support.

2  Slide the edge guide to the left.

3   Insert paper with the printable side up, against the right side of the 

feeder. Then slide the edge guide against the paper.

  

Note: You can load up to 150 sheets of plain, letter-size paper in 

the rear sheet feeder. Do not load paper above the arrow on the 

edge guide.

 

 Using the optional legal-size paper support, you can load up to 

60 sheets of plain, legal-size paper. See the back of this sheet for 

information on ordering the optional legal-size paper support. 

Turn on the printer

1  Connect the power cable.

 

Note: Do not connect to the computer at this time.

2  Press the button.

 

Load paper in the cassette

1   Pull out the front paper cassette. Make sure you don’t pull out the 

cassette cover.

Cassette cover

 

 Note: If you are using the legal-size paper cassette (optional with the 

B-310N), flip open the front of the paper tray.

2  Squeeze the edge guides and slide them out.

3   Load paper with the printable side down (up to 500 sheets of 

plain paper).

4   Squeeze the edge guides and slide them against the paper. Make sure 

the paper is stacked against the front edge guide.

  

Note: Close the front cover of the legal-sized paper cassette.

5  Reinsert the cassette into the printer.

6  Slide out the output tray and flip up the extension.

4

2

Install cartridges

1  Open the cartridge cover.

 

2  Unpack the 4 ink cartridges.

3  Shake each cartridge for about 5 seconds.

4  

Make sure the cartridge lever is all the way up, then install each 

cartridge in the correct slot for its color.

 

The arrow mark should be on top and pointing toward the printer.

 

Push each cartridge in until it clicks.

Cartridge lever

5   After you install all 4 cartridges, lower the cartridge lever to the  

locked position.

6  Close the cartridge cover.

 

The printer starts charging the ink. This takes about 5 minutes.

 

Caution: Don’t turn off the printer or open any covers while it is 

charging or you’ll waste ink.

 Note: The printer ships with full cartridges and part of the ink from 

this first set of cartridges is used for charging the printer.

3

5

Choose your connection

Network Connection 
See the Network Installation Guide 

for instructions.

USB Connection
Make sure you have a USB cable (not included). Then follow the steps on 

the back of this sheet for Windows® or Macintosh®.

6

*412614400*

*412614400*

Related Manuals for Epson Epson B-510DN Business Color Inkjet Printer

0.589793s