Epson Panamorph ELPALK2 User's Manual

Epson Projector Accessories User's Manual - Panamorph ELPALK2.
Download
Page  of 5
4.9, 1085 votes
background image

 

 

PANAMORPH ELPALK2 CEILING MOUNT ANAMORPHIC LENS KIT 

 

This kit is a customized version of the Panamorph AKPro attachment kit specifically intended for 
use with the Epson PowerLite Pro Cinema 7500UB projector.   
 
For both safety and performance, it is critical that the Chief RPA ceiling mount head 
included in this kit be rigidly and strongly installed to support at least 250 pounds.  
Consult a qualified installer for any additional hardware necessary.   
 
SPECIAL NOTE ON CEILING MOUNT LOCATION 
 
This kit’s attachment plate is designed so that the projector and lens system form an average 
center of mass (gravity) approximately located at the center of the ceiling mount pipe.  As a 
result, the ideal location for the ceiling mount is 2” (50mm) to the left of the horizontal 
screen center.  
If the ceiling mount is already installed it may be an easier alternative to shift 
the screen to the right by this same amount.  If the entire system is already installed then the 
third alternative is to use the necessary amount of horizontal lens shift to compensate.  This 
shift will cause a slight amount of horizontal keystoning through the Panamorph lens but may be 
small enough (especially at longer throw ratios) to overscan into the border of the screen.  Also, 
be sure that you do not install the projector at an extreme end of its zoom range otherwise you 
may not have enough zoom for adjustment of the final image. 
 
Kit Components—See Page 4 
 
STEP ONE - CONNECT THE ATTACHMENT PLATE:
  Place the Attachment Plate over 
the projector ceiling mount holes as guided by the Attachment Plate diagram.  Now insert a 5/8” 
plastic spacer between the projector and the Attachment Plate at each of the four mount holes.  
Insert and tighten an M4x30mm silver screw through a M4 lock washer, M4 flat washer, the 
Attachment Plate and then the spacer into each of the projector’s mounting holes.

   

Page 1 

Related Manuals for Epson Panamorph ELPALK2

0.546904s