Garmin Intelliducer Transom Mount Sensor With Depth and Temperature Quick Start Manual

Garmin GPS Quick Start Manual - Intelliducer Transom Mount Sensor With Depth and Temperature.
Download
Page  of 8
4.2, 1936 votes
background image

Transom Mount Intelliducer 

Installation Instructions

To obtain the best possible performance, install your Transom Mount Intelliducer according to 

the following instructions. If you experience difficulty during the installation, contact Garmin 

Product Support, or seek the advice of a professional installer.
This Transom Mount Intelliducer provides depth information either to a NMEA 0183-

compatible device, or to your existing NMEA 2000® network, depending on the model. For 

more information about NMEA 2000, visit www.garmin.com.

WARNING: See the Important Safety and Product Information guide in the product box for 

product warnings and other important information.

Product Registration

Help us better support you by completing our online registration today! Connect to our Web site 

at http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place.
For future reference, write the serial number assigned to your Intelliducer in the space provided. 

The serial number is located on a sticker around the cable.

Serial number 
Contact Garmin

Contact Garmin if you have any questions while installing or using your Intelliducer. In the 

USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, or go to  

www.garmin.com/support/.
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 

2380000 (within the UK).

Packing List and Tools Needed

Before installing your Intelliducer, confirm that your package includes the following items. If 

any parts are missing, contact your Garmin dealer immediately.
Standard Package

• TransomMountIntelliducer(notpictured)
A –5mmflatwashers(2)
B –5×30mmscrews(2)
C –10-32locknut(1)
D –4×12mmscrew(4)
E –10-32×1.75in.screw(1)
F –1/4in.cableclamps(2)
G –Plasticspacer(1)
H –1/4in.rubberwasher(1)
I –Cabletie,5.6in.(4)
J –Cableentrycover(1)
K –NMEA2000T-connector(1)

(NMEA2000Intelliduceronly)

F

H

C

D

K

I

J

G

E

A
B

Tools Needed

• Drillanddrillbits
• 3/8in.(9.5mm)wrenchorsocket
• Maskingtape
• Number2Phillipsscrewdriver
• Marinesealant

March2008

190-00889-01Rev.B

PrintedinTaiwan

0.481943s