GE 15077 GE Strip Timer Owner's Manual

GE Timers Owner's Manual - 15077 GE Strip Timer.
Download
Page  of 1
4.1, 2080 votes
background image

GETTING STARTED

To actuate the battery (one AA battery is provided with the timer), pull the tab 
sticking out of the battery door. You may need to open the battery door to 
remove tab. Remove protective plastic from screens. All of the display shows 
for 3 seconds, then the display will read as shown in Fig. 1.

SETTING THE CURRENT TIME

While holding the CLK (CLOCK) button down, press the DAY, HR (HOUR) and MIN 
(MINUTE) buttons to set the day of the week, hour and minutes respectively.

PROGRAMMING EVENTS

1. Press the PROG button once. The display reads
 

• 1 ON MO TU WE TH FR SA SU --:-- , if it has not been set.

 

• 1 ON and previous setting, if it has already set.

Thenumber1indicatesthatyouarenowprogrammingtimer#1.

2. Press the DAY button repeatedly. The display shows the day on which you 

want the timer to turn ON.

 

The day options include:

 

• All days of the week (MO TU WE TH FR SA SU)

 

• Any single day of the week (MO TU WE TH FR SA SU)

 

• Weekdays only (MO TU WE TH FR)

 

• Weekends only (SA SU)

3. Press the HR (HOUR) and MIN (MINUTE) buttons to select the time of day 

when you want the timer to turn ON.

4. Press the PROG button once again. The display reads
 

• 1 OFF MO TU WE TH FR SA SU --:--, if it has not been set.

 

• 1 OFF and previous setting, If it has already set.

5. Repeat the procedure in steps 2 and 3 to select the day and time when you 

want the timer to turn OFF.

6. Repeat the procedures in steps 1 to 5 to select the time and day when you 

want the timer to turn ON and OFF for the other six events.

7. When programming is complete, press the CLK (CLOCK) button to return to 

the current time display.

REVIEWING AND CLEARING YOUR PROGRAMS

1. Press the PROG button repeatedly to check the ON and OFF setting for each 

event.

2. While holding the MODE button down, press the PROG button to clear the 

setting. Push clock button to return to main.

ACTIVATING YOUR PROGRAMS

1. Press the MODE button until the AUTO indicator is displayed. The timer will 

operate automatically as programmed.

2. Press the MODE button until the RDM (RANDOM) indicator is displayed. The 

timer will operate randomly as programmed.

Random is a feature that will randomize your current settings either + or - 30 
minutes giving your home a lived in appearance to deter intruders.

MANUAL OVERRIDE

1. Press the MODE button until the ON indicator is displayed. The output of the 

timer will turn and remain on until the mode is changed again.

2. Press the MODE button until the OFF indicator is displayed. The output of the 

timer will turn off and remain off until the mode is changed again.

OPERATING THE TIMER

1. Plug the power strip into an outlet.
2. Plug the appliances to be controlled by the timer into un-used timed outlets 

on the power strip.

3. Turn the switch on the strip timer to the “on” position.
4. Make sure that appliances are turned on.

POWER SAVING STRIP TIMER  

8 Outlet Power Strip With Digital Timer - 7 Day Programmable 

Function with 4 Outlets Based On Timer

and 4 Outlets Always On-Switched

RATINGS
120V / 15A / 1800W
14/3 AWG SJT Vinyl Power Cord

TIMER OPERATING INSTRUCTIONS

15077

Manual Version 2

11-24-2009

www.jascoproducts.com

Timer Outlets

Switched Outlets

Fig. 1

MO

OFF

AM

Related Manuals for GE 15077 GE Strip Timer

0.483695s