GE 2 2-9876 2-9876 User's Manual

GE Answering Machine User's Manual - 2 2-9876 2-9876.
Download
Page  of 1
4.7, 1555 votes
background image

RING SELECT

2 •

4

 TOLL

• SAVER

P.O. Box 1976, Indianapolis, IN 46206

©␣ 1996 Thomson Consumer Electronics, Inc.,

Trademark(s) ® Registered

Marca(s) ® Registrada(s)

We bring good things to life.

• ONE TELEPHONE LINE CORD

2-9876

Digital
Telephone Answerer
User's Guide

INTRODUCTION

Your new GE Model 2-9876 Answerer is designed to record messages using
a digital memory. This system eliminates the need for tapes while it provides
an expanded range of answering system features.

Please read this USE AND CARE GUIDE carefully to familiarise yourself
with all the features of your new Answerer. Retain this guide for future
reference.

FCC NUMBER IS LOCATED ON THE BOTTOM OF THE BASE.

LOAD NUMBER IS LOCATED ON THE BOTTOM OF BASE.

OTHER IMPORTANT INFORMATION ON LAST PAGE OF THIS GUIDE.

A

Parts Check List

Carefully remove the unit from the package. Check this list to be certain
all components are included. Remember to save your sales receipt in case
you ever need warranty service.

• AC POWER SUPPLY
   WITH POWER CORD

INTRODUCTION

B.  Operational Summary

Your new GE Model 2-9876 Answerer has digital memory. It eliminates the
need for tapes and provides a full range of features. The answering system
can hold up to 14 minutes of messages or a maximum of 40 individual
messages.

Three individual Mailboxes in the unit allow the caller to leave a message
for a specific party. If you do not wish to separate messages, you may use
the Main Mailbox only. Two outgoing announcements may be recorded.

When you are at home, you can use your new system to:

Answer calls when you cannot answer the telephone.

Screen incoming calls when you do not want to be disturbed.

Take messages from callers.

Record memos directly using the unit's built-in microphone.

Erase or save all messages. Erase or save selected messages.

Super VOX allows the Answerer to disconnect automatically if a calling
party hangs up or stops talking. The unit also places a time and day stamp
on each incoming message or memo.

When you are away, you can use any touch tone phone to:

Listen to messages in any mailbox.

Bypass the announcement and leave a message quickly.

Erase selected messages from memory.

Skip through or repeat your messages.

Turn your answering system on or off.

Change your announcements.

Leave a memo.

A three-digit, factory set security code is written on the underside of the
Answerer. Your security code must be entered to use any remote functions.
This code prevents unauthorised use of remote operation.

A voice menu is programmed into your new Answerer to guide you through
remote operations.

CONTROLS and FEATURES

A. Answerer Features

Fully Digital (Tapeless recording)

Better reliability than tape.

No moving parts to break, jam, or wear out.

Instant playback of incoming messages —␣ no need to wait
for a tape to fast forward or rewind.

Fourteen minutes of total recording time or a maximum of 40 messages.

Voice Time/Day Stamp answerer will tell you the time and day each
message was received.

Digital Message Counter tells you the number of messages you have
received.

Auto Disconnect stops answerer when any phone extension is picked up.

Super VOX Time Out  stops answerer when a caller hangs up; when a dial
tone is heard; or when call progress signals (computer or FAX signals) are
heard.

Two Outgoing Announcements for added convenience.

Three Mailboxes to allow the caller to leave a message for any one of three
parties.

Skip messages, forward or backward, instantly with the tap of a button.
Message counter will tell you what message number is playing.

Selective erase message function lets you save important messages, or
messages for other people.

Instant Replay plays back the last 8 seconds of a message you're listening
to.

Beeperless remote message retrieval with 10 functions and a voice menu
to assist you. Messages are automatically saved unless you intentionally
erase them.

Call Screening Speaker

Memo Recording —␣ allows local message recording.

Toll Saver —␣ for remote operation.

Message Control — allows you to set the Answerer to either accept mes-
sages up to two minutes or four minutes.

Battery Backup —␣ holds messages, time/day clock and announcements
during temporary power outages (9 volt battery required.)

Battery Lo Indicator digital display flashes "Lo" when battery needs to be
replaced.

Two-Year Limited Warranty

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

ANSWERING SYSTEM

VOICE TIME/DAY  STAMP

D

I

G

I

T

A

L

ANNOUNCE 1    ANNOUNCE 2

ANSWER ON

  REVIEW               STOP                  SKIP

MAILBOX 2                                   MAILBOX 3

                          

    MAIN

ERASE

INSTANT REPLAY

MESSAGES

08

• ANSWERER

Model 2-9876B
20759290

Printed in Malaysia

ANNOUNCE 1    ANNOUNCE 2

ANSWER ON

  REVIEW               STOP                  SKIP

MAILBOX 2                                   MAILBOX 3

                          

    MAIN

ERASE

INSTANT REPLAY

MESSAGES

02

H.

Automatic Answering Operation

If the message indicator reads "—␣ —", tap
ANSWER ON button to turn answerer on.

When the system answers a call, the caller
hears the selected outgoing announce-
ment followed by a beep.

After the caller leaves a message, the
answerer notes the time and day at the
end of the message. The message is
stored in the selected mailbox and the
MESSAGES window displays the total
number of messages currently stored in
the answerer.

ANSWERER OPERATION

F.

Recording A Memo

Press and hold the desired MAILBOX button. Recording will start after the
beep.  Speak into the microphone and release the Mailbox button when
finished.  Another beep will indicate the end of the recording and the
MESSAGES indicator will be advanced by one count.

Note: A recorded MEMO is then treated like any other message stored  in a
specific mailbox.

G.

Message Counter Display Operation

The MESSAGES indicator will display the following in the two-digit
display.

1. If answerer is 

ON, the total

number of messages in memory
in all mailboxes will be displayed,
00 to 40.

2. If answerer is 

OFF, the LED

display show "— —".

3. If answerer is not receiving AC

power, the display will be blank.

4. If a mailbox is selected to play,

the total number of messages in
that mailbox will be displayed
momentarily. Then, the display
will show the message number
being played.

5. If the battery needs to be replaced

or there is no battery installed,
the 

LED display will flash "Lo".

6. If memory is full, the display will

flash rapidly.

MESSAGES

0  1

MESSAGES

— —

MESSAGES

L 0

MESSAGES

00

MESSAGES

— —

ANSWER ON

ANNOUNCE 1    ANNOUNCE 2

TIME/DAY SET

HOUR   MINUTE    DAY

TIME

                                                        

CHECK

TIME/DAY SET

HOUR   MINUTE    DAY

TIME

                                                        

CHECK

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

D

I

G

I

T

A

L

ANNOUNCE 1    ANNOUNCE 2

ANSWER ON

  REVIEW               STOP                  SKIP

MAILBOX 2                                   MAILBOX 3

                          

    MAIN

ERASE

INSTANT REPLAY

MESSAGES

08

2.

Connect the Line Cord

Plug one end of the telephone line cord into the "TO WALL
OUTLET" jack at the rear of the unit. Plug the other end into
the telephone outlet. An RJ11C outlet jack is required. If you don't
have this type of outlet jack, an adapter can be purchased from
any telephone store.

3.

Connect your Telephone  (If you do not want to connect a telephone
to the Answerer, go to step 3.)  Plug your telephone cord to the
"FROM TELEPHONE" jack at the rear of the unit.

4.

Connect the Power Cord
Plug the right angle plug on the power cord into the "

POWER "

jack at the rear of the unit.

5.

Plug in the Power Supply
Plug the power supply into the 110 VAC power outlet. A power-
up  tone will be heard and the 

MESSAGES display will read "00".

The 

ANNOUNCE 1 and ANNOUNCE 2 LED's will flash.

Note: If message display flashes "00" and "Lo", then the unit does
not detect fresh 9V battery in place.

INCOMING
MESSAGES

RING SELECT

POWER

2

MINUTE

4

MINUTE

2 •


4

TOLL
SAVER

9V DC

D.

Selection Of Announcement 1 or 2

1.

The selected OGA will have the LED ON over the button.

2.

Tap the ANNOUNCE 1 or ANNOUNCE 2 button to select which an-
nouncement you wish to greet caller. (The OGA will play back when
selected.)

3.

If both announcement LED's are flashing, there are no valid recorded
announcements, in which case the unit's built-in default outgoing
announcement of "Please leave message after tone" will be used
to answer the phone.

E.

Typical Announcements That Refer Callers To
Mailboxes

Since your new answerer has the advanced feature of being supplied
with three Mailboxes (Main Mailbox, Mailbox 2 and Mailbox 3) a calling
party using a touch tone telephone may choose to leave a message in a
particular mailbox. (A party calling from a rotary phone can only leave a
message in the main mailbox.)

For a calling party to leave a message into a particular mailbox, the party
is required to press '1' for the main mailbox, '2' for mailbox 2, or '3' for
mailbox 3, from the calling phone. If pressed during the OGA or within
five seconds after the beep at the end of the OGA, the unit will announce
"Leave Message," beep, and then start recording for that particular mail-
box. If no key is pressed the message will go into the main mailbox.

Example Greetings

Example A:  "Hello, we cannot come to the phone right now. If you are
calling from a touch tone phone, press '2' to leave a message for Mary,
press '3' to leave a message for Kathy, or wait for the tone and leave a
message in our Main Mailbox. Thank you."

Example B:  "Hello, this is XYZ company. We cannot take your call right
now. If you are calling from a touch tone  phone, press '1' to leave a
message for the receptionist, press '2' to leave a message for accounting,
or press '3' to leave a message for sales, or wait for the tone and leave a
message in our Main Mailbox. Thank you."

Note:   The fourteen-minute all-digital memory is shared between the
announcements and all messages and memos. The briefer your announce-
ments, the more memory there will be left for messages.

ANNOUNCE 1    ANNOUNCE 2

ANSWERER OPERATION

A.

Answer On/Off

1.

Rotate the 

VOLUME control to a comfortable level (usually midway.)

2.

To turn off, press 

ANSWER ON. Voice will announce "Answer

functions are off."  The 

MESSAGES display will indicate "— —".

Note: The messages and setting contained within the Answerer
will not erase when the unit is off. The unit simply does not answer
incoming calls.

3.

To turn on, press 

ANSWERER ON. (If you are plugging in the unit

for the first time, it should turn 'on' automatically.)  Voice will
announce "Answer functions are on." The 

MESSAGES display

will indicate the total number of messages stored in the unit.

B.

Setting The Time/Day Stamp

The Time/Day is added to the end of each message or memo. Before
using your new Answerer, the time/day stamp should be properly set.

1.

Rotate the VOLUME control to a comfortable level (usually midway.)

2.

The Time/Day Stamp controls are located on the side of the Answerer.

3.

Set hour

a) Advance the hour by pressing and

holding or tapping the HOUR button
until the Voice indicates the appro-
priate hour, 1-12.

Note: Voice will announce "AM"or "PM"
as it reaches one o'clock while advancing
hours.

b) Release the button when the correct

hour is voiced.

4.

Set Minute

a) Advance the minute by a combination

of pressing and holding or tapping
the 

MINUTE button until the Voice

indicates the correct minute, 0-59.

b) Tapping the button advances minute

by single digits 0, 1, 2, 3...59.

c) Pressing and holding the button

advances minute by increments of
five, 0, 5, 10, 15...55.

- VOLUME +

TIME/DAY SET

HOUR   MINUTE    DAY

TIME

                                                        

CHECK

- VOLUME +

ANSWER ON

CONTROLS and FEATURES

B.

Answerer Controls

1.

Speaker —␣ plays back messages and announcements.

2.     

Mic —␣ microphone picks up voice to record announcements or

    messages.

3.

Announce 1 —␣  tapping selects and plays outgoing announcement
(OGA) #1. Press and hold to record new greeting.

4.

Announce 2  —␣ tapping selects and plays OGA # 2. Press and hold
to record new greeting.

5.

Answer On —␣ turns answer function on or off. (Message indicator
displays '—␣ —" for off.)

6.

Message Indicator Display

7.

Erase —␣ allows you to erase selected messages or all messages.

8.

Review —␣ during playback, replays an earlier recorded message in
sequence.

9.

Stop Button —␣ stops functions.

10.

Skip —␣ during playback, skips message and moves to the next in
sequence.

11.

Instant Replay —␣ plays back the last 8 seconds of a message you're
listening to.

12.

Mailbox 2 —␣ Tap to play messages in mailbox #2.

13.

Main —␣ Tap to play messages in main mailbox (Mailbox 1).

14.

Mailbox 3 —␣ Tap to play messages in mailbox #3.

15.

Slide Out Tray —␣ contains Quick Reference Guide.

16.

Incoming Messages —␣ sets answerer to record messages up to 2
minutes or 4 minutes in length.

17.

Ring Select —␣ selects number of rings (2, 4, or Toll Saver) for
answer function pick-up. The machine will answer on the number
ring selected.

18.

Power Jack —␣ AC/DC Adapter input jack. Also provides Answerer
reset.

19.

Line Jack — connects to telephone wall jack.

20.

Line Jack —␣ connects answerer to telephone.

21.

Volume — sets volume for unit.

22.

Time/Day Set —␣ allows setting of time/day stamp which is added
after incoming messages.
• Hour button —␣ sets the hour.

• Minute Button —␣ sets the minute.

• Day/Time Check Button —␣ sets day of the week. Also provides

audible time/day setting report.

•  

 Three-Digit Security Code —␣ allows you to call your GE Model 2-9876 Answerer

    from another location.␣ (Security Code can be found on the bottom of the
    answerer).
•   

9-volt battery compartment —␣ located on the bottom of the answerer.

TO SET HOUR:  HOLD    HOUR     FOR FAST CHANGE, TAP    HOUR    FOR SLOW CHANGE.

TO SET MINUTE:  HOLD    MINUTE    FOR FAST CHANGE, TAP   MINUTE    FOR SLOW CHANGE.

TO SET DAY:  HOLD    DAY/TIME CHECK    , STOP AT CORRECT DAY.    TO CHECK TIME/DAY:  TAP    DAY/TIME CHECK

 .
TO RECORD MEMO:  PRESS    MEMO    , ALL MAILBOX LIGHTS WILL FLASH. PRESS AND HOLD DESIRED MAILBOX

BUTTON, SPEAK AFTER TONE..,RELEASE WHEN FINISHED.

QUICK REFERENCE GUIDE   READ USE AND CARE GUIDE FOR DETAILS OF OPERATION.

TO ERASE INDIVIDUAL MESSAGES:  PRESS AND RELEASE   ERASE     AT ANYTIME  A MESSAGE IS BEING PLAYED - TONE

WILL SOUND, MESSAGE WILL BE ERASED AND NEXT MESSAGE WILL START.

TO RECORD YOUR ANNOUNCEMENT: CHOOSE EITHER    ANNOUNCE 1    OR    ANNOUNCE 2    , PRESS AND HOLD

BUTTON - SPEAK AFTER TONE..,RELEASE WHEN FINISHED.
ANNOUNCEMENT NOTE: FOR A CALLING PARTY TO LEAVE A MESSAGE INTO A PARTICULAR MAILBOX - THE PARTY IS

REQUIRED TO PRESS "1" (MAIN MAILBOX), "2" (MAILBOX 2), OR "3" (MAILBOX 3) BEFORE LEAVING MESSAGE. (TONE DIAL ONLY)

IF NO KEY IS PRESSED ,  MESSAGE WILL DEFAULT INTO MAIN MAILBOX.

TO ERASE ENTIRE MAILBOX:  PRESS AND HOLD    ERASE    UNTIL YOU HEAR TONE AND ALL MAILBOX LIGHTS FLASH..,

RELEASE. PRESS AND HOLD DESIRED MAILBOX BUTTON UNTIL YOU HEAR TONE..,RELEASE. ALL MAILBOX  MESSAGES ERASED.

15

13

12

10

5

9

8

7

6

4

3

2

1

11

14

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

....................................

ANSWERING SYSTEM

VOICE TIME/DAY  STAMP

D

I

G

I

T

A

L

ANNOUNCE 1    ANNOUNCE 2

ANSWER ON

  REVIEW               STOP                  SKIP

MAILBOX 2                                   MAILBOX 3

                          

    MAIN

ERASE

INSTANT REPLAY

MESSAGES

08

VOLUME

 

+

TIME/DAY SET

HOUR  MINUTE  DAY/

TIME
CHECK

21

22

INCOMING
MESSAGES

   2
MINUTE

POWER

RING SELECT

   4
MINUTE

 TO WALL
OUTLET

FROM

TELEPHONE

2 •

4

 TOLL

• SAVER

 9V DC

16

17

18

19

20

INCOMING
MESSAGES

   2
MINUTE

POWER

RING SELECT

   4
MINUTE

 TO WALL
OUTLET

FROM

TELEPHONE

2 •

4

 TOLL

• SAVER

 9V DC

POWER

CT

 TO WALL
OUTLET

FROM

TELEPHONE

 TOLL
• SAVER

 9V DC

1.

The  Auto Disconnect Feature

Lifting the 

HANDSET on any telephone on the same line while the

answerer is recording a phone message will automatically interrupt
and stop the answerer portion of the unit. This allows you to screen
your calls.

2.

The Super "VOX" Feature

Super VOX is a sound recognition feature built into the electronics
of your answerer. This feature saves memory space by hanging up
when: the caller hangs up; it hears a dial tone; or, call progress
signals (computer or FAX signals) are heard.

Note: Message recording will be terminated in any one of the
following conditions:

1. The 

STOP button is pressed.

2. An extension phone is picked up.

3. Super 

VOX times out.

4. The maximum message length time is reached (2 minutes or 4
    minutes).

5. Recording memory is full (14 minutes total).

6. Dial tone is detected.

I.

Setting The Answerer For Incoming Messages Time
Limit

Digital
Telephone Answerer

MODEL 2-9876

Dial telephone number and wait

for system to answer.

Press any key for OGA

(Outgoing Announcement) bypass

Enter 3-digit security code

after transfer tone.

Enter Touch Tone  Command,

       or

Press    9    for Voice Menu.

Hang up.

    Write 3-digit security code in boxes.

Digital
Telephone Answerer

MODEL 2-9876

1

Dial telephone number and wait
for system to answer.

2

Press any key for OGA
(Outgoing Announcement) bypass

3

Enter 3-digit security code
after transfer tone.

4

Enter Touch Tone  Command,

       or

Press    9    for Voice Menu.

5

Hang up.

    Write 3-digit  security code in boxes.

INCOMING
MESSAGES

   2
MINUTE

   4

MINUTE

1.

Setting the 

INCOMING MESSAGES

switch on the back of the Answerer
to 

2 MINUTE position allows the

caller to leave messages up to 2
minutes in length.

2.

Setting the 

INCOMING MESSAGES

switch on the back of the Answerer
to 

4 MINUTE position allows the

caller to leave messages up to 4
minutes in length.

- VOLUME +

ANSWERER OPERATION

J.

Volume Control

You can use the volume control on the
side of the Answerer to adjust the volume
of the system's speaker. Rotate the knob
until you find a comfortable volume level.

K.

Screening Your Calls

Two settings are essential to using the Answerer's Call Screening
feature

1. Turn the Answerer

 ON.

2. Set the 

VOLUME to a level that

can be heard from wherever
you are.

If a call comes in that you decide to take, lift the handset of any telephone
on the line. The system will stop recording and you may speak to the caller.
No further message space will be used by the call.

L.

Setting The Ring Select Switch

Set the

 RING SELECT switch on the back of your Answerer to 2, 4, or Toll

Saver to choose the number of rings before the system answers.

1.  Position '2' —␣ the unit will answer

 on the second ring.

2.  Position '4' — the unit will answer

 on the fourth ring.

3.  Position 

TOLL SAVER — the unit

 will answer on the second ring
 if you have new messages and
 answer on the fourth ring if there
 are no new messages.

Use the 

TOLL SAVER setting when you will be calling from another

location to check for messages. If you have new messages waiting the
system will answer on the second ring. If there are no new messages, the
phone will answer on the fourth ring. You can then hang up on the third
ring to avoid paying long distance charges.

ANSWER ON

- VOLUME +

5.

Set Day

a) Advance the day by pressing and

holding the DAY/TIME CHECK
button until the Voice announces
each day in sequence.

b)   Release the button at correct day.

6.

Checking the Time/Day Stamp:
a)  Tap the DAY/TIME CHECK button.

b)  The Voice will respond with the

 current time and day.

Note:  A time check can be made at anytime answering system is not in use.

Important:  If the Time/Day Stamp has not been set, the voice system

      will announce the following during a time check and at
      the end of each message play "1:00 AM Monday."

C.

Recording And Playback Of Outgoing
Announcements (OGAs)

Your new Answerer is equipped with the
capability of selecting one of two out-
going announcements (OGA).  Before using
you should record an OGA.  This is the
announcement the caller will hear when
the unit answers a call.

1.

Announcement 1 recording/playback

a) To record an announcement, press and hold 

ANNOUNCE 1

button. Wait for a beep. Speak clearly and close —␣ about  9
inches —␣ to the microphone. Recording will stop when button
is released and another beep will sound.

b) The 

LED above the button will stay ON.

c) Tap 

ANNOUNCE 1 button and the unit will play back your OGA.

2.

Announcement 2 recording/playback

a) To record an announcement press and hold 

ANNOUNCE 2 button.

Wait for a beep. Speak clearly and close to the microphone.
Recording will stop when the button is released and another beep
will sound.

b) The 

LED above the button will stay ON.

c) Tap 

ANNOUNCE 2 button and the unit will play back your OGA.

3.

To record a new announcement, simply record over the old one.

CAUTION:

 

UNPLUG PHONE

CORD FROM W

ALL BEFORE

CHANGING BA

TTERY

A

TTENTION:

DEBRANCHER LE TELEPHONE

DE LA PRISE MURALE  V

ANT

DE CHANGER LES PILE

 '

 '

 '

INSTALLATION

A.

Setting Up The Answerer

Follow these steps to set up your new Desktop GE Model 2-9876 Answerer
for proper operation.

1.

Install the 9 Volt Battery

The 9 volt battery will provide back-up power during temporary
power outages. Using a pointed object, insert in opening of battery
compartment on bottom of BASE and pop up. Insert battery and snap
into place. Replace battery cover.

MESSAGES

0.723653s