GE 24944v2 Universal Remote Owner's Manual | Page 6

GE Remote Control Owner's Manual - 24944v2 Universal Remote.
Download
Page  of 44
4.9, 2170 votes
background image

6

  Programming Your Remote

Your GE universal remote control is designed to 
control multiple audio/video devices such as TV, 
DVD, DVR, satellite, cable and audio using only one 
remote. To use this remote, you will need to program 
it to control the devices of your choice. There are two 
ways to program the remote - direct code entry or 
auto code search. 

 

Direct Code Entry (Recommended)

1.  Locate the Remote Code List provided 

in this manual. Find the

 DEVICE 

CATEGORY you wish to program (for 
example 

TV, DVD, CBL/SAT, DVR/

AUX) and then find the BRAND of that 
device. Circle all the codes under that 
brand. Example: For a GE TV, locate the 
TV code section then circle all of the 
GE TV codes.

2.  Manually turn on the device you wish 

to control. 

3.  Press and hold the 

SETUP button 

until the red indicator light stays on 
(approximately 4 seconds) and then 
release the 

SETUP button.

4.  Press and release the desired device 

button on the remote (

TV, DVD, CBL/

SAT, DVR/AUX). The red indicator will 
blink once and then remain on.  

5.  Enter the first 4-digit code previously 

found in the code list using the 
number buttons on the remote. If the 
code entered is a valid code, the red 
indicator light will turn off. If the code 
entered is not a valid code, the red 
indicator light will flash and remain on 
allowing you to re-enter the code. 

 

Note: If no buttons are pressed for 10 
seconds, the remote will exit the SETUP 
mode and you will have to start over.

Related Manuals for GE 24944v2 Universal Remote

0.497990s