GE ALM1 Installation Guide

GE Indoor Fixtures Installation Guide - ALM1.
Download
Page  of 3
4.8, 1194 votes
background image

 WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL or IEC approved wire for input/output connections. 

Minimum size 18 AWG.

RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.
RISQUES D’INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N’utilisez que des fils approuvés par UL ou IEC pour les entrées/sorties de 

connexion. Taille minimum 18 AWG.

GE

Lighting

Installation Guide

imagination at work

Linear Lighting
(ALM1 Series)

AlbeoTM LED Luminaire

Prepare Electrical Wiring

Electrical Requirements

• The LED driver must be supplied with 120-277 VAC, 50/60

Hz per product label and connected to an individual properly 

grounded branch circuit, protected by a 15 or 20 ampere 

circuit breaker. 

Grounding Instructions

• The grounding and bonding of the overall system shall be

done in accordance with National Electric Code (NEC) Article 

600 and local codes.

BEFORE YOU BEGIN

Read these instructions completely and carefully.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (A)/NMB-3(A)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, 

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the 

interference at his own expense.

Tools and Components Required:
• ALM1 Series fixture

• Mounting hardware (not Included)

• #2 Phillips screwdriver

• Drill

0.576817s