GE Sievers TOC Analyzer Flow Switch 800 User's Manual

GE Water Pumps User's Manual - Sievers TOC Analyzer Flow Switch 800.
Download
Page  of 16
4.8, 1492 votes
background image

 

 

 

6060 Spine Road 

 

Boulder, CO 80301 USA 

 

T  303 444 2009 

 

F  303 444 9543 

 

 

GE Analytical Instruments, Inc. ©2005H 

Page 1 of 16 

DIN 30001 Rev. E 

 

TOC,FLOW SWITCH UPGRADE 2.12CBI 

Sievers 800 TOC Analyzer Flow Switch Upgrade 

(Flow Switch Kit and Firmware 2.12 CBI) 

 
1.  Purpose:  To describe the mechanical installation for the flow switch, firmware 2.12 CBI 

upgrade installation and operation of the flow switch. 

 
2.  Scope:   This procedure describes the activities required to install the flow switch and 

firmware 2.12 CBI in all Model 800 series TOC analyzers.  For TURBO analyzers, 
this procedure describes the installation and configuration of the flow switch.  
Turbo Analyzers will omit the firmware installation section. 

 
3.  Materials and Tools: 
 

7/16" open end or adjustable wrench 
1/2" open end wrench 
Flat head screwdriver 
Phillips head screwdriver 
Scriber 
Teflon® tape 

 
WARNINGS: 

 
•  A 60-micron filter must be used to ensure proper operation of the flow switch.  
 
•  Do not over tighten any fitting. 
 
•  Switch orientation should be no more than 15° from vertical alignment.  

 

 
•  Do not install units near ferrous metals, magnets or electromagnetic fields. 

 

•  Please review the enclosed Operation and Maintenance Manual.  There have 

been features added to the analyzers.  These additions are dependent upon 
the firmware version and software version currently in use. 

Related Manuals for GE Sievers TOC Analyzer Flow Switch 800

0.542604s