GIGABYTE GA-F2A85X-UP4 (rev. 1.0) Owner's Manual

GIGABYTE Motherboards Owner's Manual - GA-F2A85X-UP4 (rev. 1.0).
Download
Page  of 3
4.2, 1198 votes
background image

- 1 -

Enabling LucidLogix Virtu MVP
Lucid Virtu GPU virtualization technology is an optimized virtualization software that improves your PC's 
visuals, with faster response time, improved video processing and smoother media playback, al  within 
a low power environment. LucidLogix Virtu MVP provides two working modes, i-Mode and d-Mode. In i-
Mode, the monior is connected to the onboard graphics port. It provides users with motherboards special 
features and power saving options when no 3D gaming is used. Disabling the discrete card when it wasn't 
needed of ers a tangible reduction in power consumption, and perhaps most significantly, a tidy reduction 
of your electricity bil s too. In d-Mode, the monior is connected to the discrete card. Demanding gamers can 
achieve uncompromised 3D performance when playing 3D games. 

A. System Requirements
   -  A CPU with integrated graphics 
   -   A motherboard with integrated graphics and supporting LucidLogix Virtu MVP and motherboard driv-

ers 

   -  Windows 7, Windows 8
   -   An AMD Radeon HD 5000/6000/7000 series and NVIDIA GTX 400/500/600 series graphics card and 

its driver

B. Configuring the BIOS and Instal ing the Graphics Card

 • i-Mode:

Step 1: Connect the monitor cable to an onboard graphics port. 
Step 2: Enter BIOS Setup, go to Peripherals. Set the first output device to the onboard graphics and set 

the onboard graphics to always enabled. For example, for Intel motherboards, set Initial Display 
First 
to IGFX and Internal Graphics to Enabled. (Actual BIOS items may differ depending on 
motherboard models and BIOS version.)

Step 3: Save the set ings and turn of  the computer. Refer to the "Instal ing an Expansion Card" section in 

the user's manual to instal  the discrete card on the PCI Express x16 slot. 

 • d-Mode:

Step 1: Refer to the "Instal ing an Expansion Card" section in the user's manual to instal  the discrete card 

on the PCI Express x16 slot. 

Step 2: Connect the monitor cable to the discrete card. 
Step 3: Enter BIOS Setup, go to Peripherals. Set the first output device to the discrete card and set the on-

board graphics to always enabled. For example, for Intel motherboards, set Initial Display First to 
PEG
 and Internal Graphics to Enabled. (Actual BIOS items may dif er depending on motherboard 
models and BIOS version.)

Also See for GIGABYTE GA-F2A85X-UP4 (rev. 1.0)

0.497356s