Honeywell NPB-MDM User's Manual

Honeywell Modems User's Manual - NPB-MDM.
Download
Page  of 4
4.8, 1136 votes
background image

INSTALLATION INSTRUCTIONS

95-7730

NPB-MDM Modem Card

GENERAL

CAUTION

This modem may require testing and 
certification in some European and Asian 
countries prior to connecting to the Public 
Switched Telephone Network. Refer to the 
particular country’s telephone authorities for 
further information.

This document covers the mounting and wiring of the 
NPB-MDM Modem Card in a Honeywell WEB-201 
Controller. For related WEB-IO mounting and wiring 
details, refer to the WEB-201 Controller Installation 
Instructions, form no. 95-7722.

The Honeywell NPB-MDM Modem Card uses a 56kbps 
auto-dial, auto-answer modem with one RJ-11 connector 
for the phone line. The NPB-MDM Modem Card must be 
installed in Option Slot 1 only, where it operates as 
COM1. This disables the RS-232 base serial port (DB-9 
connector) on the WEB-201 Controller. Only one 
NPB-MDM Modem Card is supported in a WEB-201 
Controller. Refer to Fig. 2 for location of option slots.

SAFETY INSTRUCTIONS

NOTES REGARDING DEVICE DESCRIPTION
These instructions include indications for use and 
mounting of the device. In case of questions that cannot 
be answered with these instructions, please consult the 
product supplier or manufacturer. It is the responsibility of 
the equipment installer to ensure that al  federal, state and 
local codes are followed.

SAFETY INSTRUCTIONS
• Keep these Installation Instructions for industrial safety 

and the prevention of accidents.

• Only qualified personnel shall do mounting and 

installation work with these devices, see section titled 
“Qualified Personnel”.

• The information in these instructions must be read and 

understood by every person using this device.

QUALIFIED PERSONNEL
Qualified personnel in the sense of these instructions are 
persons who are well versed in the use and installation of 
such devices and whose professional qualifications meet 
the requirements of their work.

This includes, for example:
• Qualifications to connect the device according to 

applicable specifications and regulations, and 
qualifications to put this device into operation, to power 
it down, or to activate it by respecting the internal 
directions.

• Knowledge of safety rules.
• Knowledge about application and use of the device 

within the equipment system.

BEFORE INSTALLATION

1. Unpack the NPB-MDM Modem Card.
2. Check the equipment and report any damage to a

Honeywell representative.

3. Read all of these instructions and ensure they are 

understood.

Included in this Package
Included in this package are the following items:
• One NPB-MDM Modem Card, along with connector 

and end plate.

• INSTALLATION INSTRUCTIONS form no. 95-7730.

Materials and Tools Required
The following tools and supplies may be required for 
installation:

— #2 Phillips screwdriver: used to install the NPB-

MDM Modem Card.

0.505909s