Honeywell UC100A1021 Installation Information

Honeywell Air Treatment Installation Information - UC100A1021.
Download
Page  of 2
4.4, 1930 votes
background image

INSTALLATION INSTRUCTIONS

69-1382-4

® U.S. Registered Trademark
Copyright © 2003 Honeywell International Inc.
All Rights Reserved 

UC100A Ultraviolet

 Air Treatment System

 Replacement Lamp

APPLICATION

The UC100A Ultraviolet Air Treatment System Replacement 

Lamp is for use with the UV100A Ultraviolet Air Treatment 

System. There are four different replacement lamps for the 

five models of Ultraviolet Air Treatment Systems. See Table 1 

for your model.

INSTALLATION

When Installing this Product…

1. Read these instructions carefully. Failure to follow them 

could damage the product or cause a hazardous condi-

tion.

2. Check the rating given in the instructions and on the 

product to make sure the product is suitable for your 

application.

3. Removal and replacement of the ultraviolet lamps can 

easily be done by the homeowner following these 

instructions. The homeowner can also call an experi-

enced service technician.

4. After installation is complete, check out product opera-

tion as provided in these instructions.

Replacing Your Lamps (Annually)

CAUTION

Personal Injury Hazard. 

Power supply can cause electrical shock.

Disconnect power supply before replacing ultraviolet 

lamp(s).

Do not open base unit or lamp knob; there are no 

user-serviceable components inside.

WARNING

UV Light Hazard. 

Harmful to bare skin and eyes.

Can cause temporary or permanent loss of vision.  

Never look at the lamps while illuminated.

Only view illumination by way of the light indicator 

located on the lamp knob.

To prevent exposure to ultraviolet light, disconnect 

power to the ultraviolet air treatment system before 

servicing any part of the heating/air conditioning 

system.

CAUTION

UV Lamp Burn Hazard. 

Harmful to bare skin. 

Can cause severe burns.

Disconnect power and wait 15 minutes before 

removing the ultraviolet lamp(s).

IMPORTANT

If the lamps in your model have external wires run-

ning along the glass surface, be sure to avoid pulling 

on those wires.

CAUTION

Breakable Glass Hazard. 

Can cause personal injury.

Be careful when inserting lamp(s) into lamp base.

Wear protective gloves when handling lamp(s).

0.586321s