Honeywell UC100C Installation Information

Honeywell Air Treatment Installation Information - UC100C.
Download
Page  of 2
4.1, 1300 votes
background image

INSTALLATION INSTRUCTIONS

69-1589

® U.S. Registered Trademark
Copyright © 2002 Honeywell •  All Rights Reserved 

UC100C Ultraviolet

 Air Treatment System

 Replacement Lamp

APPLICATION

The UC100C Ultraviolet Air Treatment System Replacement 

Lamp is for use with the UV100C Ultraviolet Air Treatment 
System.

INSTALLATION

When Installing this Product…

1. Read these instructions carefully. Failure to follow them 

could damage the product or cause a hazardous condi-
tion.

2. Check the rating given in the instructions and on the 

product to make sure the product is suitable for your 
application.

3. Removal and replacement of the ultraviolet lamps can 

easily be done by the owner following these instruc-
tions. The owner can also call an experienced service 

technician.

4. After installation is complete, check out product opera-

tion as provided in these instructions.

CAUTION

Personal Injury Hazard. 
Power supply can cause electrical shock.

Disconnect power supply before replacing ultraviolet 

lamp(s).
Do not open lamp knob; there are no user-serviceable 

components inside.

WARNING

UV Light Hazard. 
Harmful to bare skin and eyes.

Can cause temporary or permanent loss of vision.  

Never look at the lamps while illuminated.
Only view illumination by way of the light indicator 

located on the lamp knob.
To prevent exposure to ultraviolet light, disconnect 

power to the ultraviolet air treatment system before 

servicing any part of the heating/air conditioning 
system.

 

CAUTION

UV Lamp Burn Hazard. 

Harmful to bare skin. 
Can cause severe burns.

Disconnect power and wait 15 minutes before 

removing the ultraviolet lamp(s).

CAUTION

Breakable Glass Hazard. 

Can cause personal injury.
Be careful when inserting lamp(s) into lamp base.

Wear protective gloves when handling lamp(s).

0.595965s