HP 1410-16G User's Manual

HP Switch User's Manual - 1410-16G.
Download
Page  of 4
4.1, 1612 votes
background image

1

HP ProCurve 1410-16G Switch Quick Setup Guide

For more detailed information to set up your switch, view or download the Installation and Getting Started Guide for your 
switch at 

www.hp.com/go/procurve/manuals.  

1. Unpack and check included parts.

Documentation kit

Read  Me  First

Quick Setup Guide

Safety and Regulatory information

Software License Agreement and Hardware Warranty 
information

Switch

Accessory kit (installation hardware)

AC power adapter (and power cord, if applicable)

2. Prepare for installation. To avoid personal injury or product damage, review the “Safety Precautions” on 
page 3.

 

3. Connect power and verify that the switch power LED turns on. The switch does not contain a power switch. It is 
turned on by connecting power through the AC power adapter supplied with your switch. 

1

2

3

 

1

2

 

Power LED = On 

 

4. Install the Switch Hardware. Turn off the switch before installing the switch hardware.

Table or Desktop: 

Attach the four self-adhesive pads 

(included in the accessory kit) to the bottom corners of 
the switch. 

 

 

 

© Copyright 2010 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without 
notice.

Printed in China 

 

February 2010 

5998-0343

*5998-0343*

QSG-1410-16G-Feb2010.fm  Page 1  Thursday, February 25, 2010  7:45 PM

0.541206s