HP PC to TV Kits Getting Started Guide

HP 3D Accessories Getting Started Guide - PC to TV Kits.
Download
Page  of 2
4.3, 2244 votes
background image

1

3

2

Product: Wireless HDMI
Document: Consumer QSP

Part number: 621361-001

Color page 1: CMYK + PMS 640

Flat size: 27.5 x 17

Color page 2: CMYK + PMS 640

Finished size: 5.5 x 8.5

Fold 1:  Horizontal, 

in half

Fold 2:  5-panel  

accordion

6620 Cypresswood Drive

Suite 120

Spring, TX 77379
832.717.4331

English on front (outside)

English on front (outside)

The power light on the TV 

adapter does not turn on.

•Ensure that the power adapter is securely connected to 

the TV adapter and to a wall outlet.

•Plug another device into the wall outlet to ensure that 

the outlet is functioning.

The link light on the TV 

adapter does not turn on.

•Ensure that the HDMI cables are securely connected to 

the components.

The link light turns on but 

continues to blink.

•Wait a few minutes for the components to complete 

initialization. You should see messages on the 

computer and/or TV screen. It may take up to 5 

minutes for initialization to complete.

•Ensure that you have connected the components 

according to the instructions.

The TV does not display 

the image that is on the 

computer.

•Press the input source but on on the TV to select the 

HDMI input.

Nothing happens when I 

press the Reset but on on 

the PC adapter. 

•The Reset but on on the PC adapter is only used for 

software upgrades.

Connect the TV adapter to your TV or other external display  

and to external power.

Components

Troubleshooting

Regulatory and Safety Notices

3If you connected to a TV, press the input source buton on the TV 

to select the HDMI input. When the components are connected 

correctly and the correct source is selected, the image on the 

computer display will be shown on the TV.

NOTE: Make sure that your computer and TV are both powered on. 

NOTE: If you are using an external display other than a TV, the display may not 

have an input source input but on and the source may cycle automatically.

NOTE: It may take a few seconds for the adapters to link to each other and for 

the image on the computer to display on the TV (or other external display).

Issue Resolution 

   

1

*The Setup menu al ows you to add or remove a video source, modify a video source name, 

disconnect a wireless link, and exit the menu. 
To add or remove a video source, or disconnect a wireless link:
1. Press the Menu button twice.

2. Press the Down or Up button to highlight Add or Remove Video Source or  

Disconnect Wireless Link.

3. Press the Menu button to select the item and execute the process.

4. Press the Menu button again to confirm adding or removing a video source, or  

disconnecting a wireless link.

 NOTE: To add a new video source after removing one, repeat the above process.  

To modify the video source name:
1. Press the Menu button twice.

2. Press the Down button to highlight Modify Video Source name.

3. Press the Menu button to execute the naming process.

4. Press the Menu button to select the video source to be renamed.

5. Use the Up or Down buttons to move horizontal y and highlight the character to be changed.

6. Press the Menu button to select the character to be changed.

7. Press the Up or Down buttons to change the character.

8. Press the Menu button to select the new character.

9. Press and hold the Menu button to select Save or Exit Video Source name.
After the Save or Exit function has been selected, the display returns to the main menu. 

 NOTE: You may need to upgrade the software on your adapter to ensure compatibility with 

devices produced by other manufacturers. When it’s available, you can download updated 

software with installation instructions from http://www.hp.com/support.

TV Adapter 

1

 

HDMI connector: Connects the  

  PC adapter to your computer.
2

 

Link light

• On: The adapter is linked to 

the TV adapter.

• Blinking: The adapter is 

attempting to link to the TV 

adapter.

3

 

USB connector: Connects  

  the USB power cable to the  

  PC adapter.

Reset button*

1

 

Up button: Scrolls up through menu.

2

 

Down button: Scrolls down through menu.

3

 

Menu/Select button: Displays the  

 

  Setup menu* and selects items. 
4

 

HDMI port: Connects the TV adapter  

 

  to your TV or display.
5

 Micro USB power port: Connects the TV    

  adapter to external power, and can also be used  

  to upgrade the HP Wireless TV Connect firmware. 
6

 

Link light

• Blinking blue: The TV adapter is attempting to 

link to the PC adapter.

• Solid white: The TV adapter is linked to  

the PC adapter.

7

 

Power light

• On: The adapter is on.

• Off: The adapter is off.

PC Adapter

1

 

Power adapter and cable: 

Connects the TV adapter to 

external power.

2

 

HDMI cable: Connects the TV 

adapter to your TV or other 

external display 

3

  

USB cable: Connects the PC 

adapter to your computer. 

Cables 

Federal Communications Commission notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment to an outlet on a circuit different from that to which the  

  receiver is connected.

•  Consult the dealer or an experienced radio or television technician for help.

Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly 

approved by HP may void the user’s authority to operate the equipment.

Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables 

having metallic RFI/EMI connector hoods.

Declaration of Conformity for products marked with the FCC logo  

(United States only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause  

  undesired operation.

If you have questions about the product that are not related to this declaration, write to:
Hewlet -Packard Company 

P. O. Box 692000, Mail Stop 530113 

Houston, TX 77269-2000

For questions regarding this FCC declaration, write to:
Hewlet -Packard Company 

P. O. Box 692000, Mail Stop 510101 

Houston, TX 77269-2000
or call HP at 281-514-3333

To identify your product, refer to the part, series, or model number located on the product. 

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

 WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio 

frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human 

contact is minimized during normal operation of tablet PCs and notebook computers.
To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not 

be less than 20 cm (8 inches), including when the computer display is closed.

 CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 

5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 

GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite systems. High-power radar 

is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85- GHz bands. These radar stations can cause 

interference with and/or damage to this device. 
In some environments, the use of wireless devices may be restricted. Such restrictions may apply in hospitals, near 

explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask 

for authorization to use it before you turn it on.

Canada notices

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. The 

device complies with Industry Canada license-exempt RSS standard(s). Wireless operation is subject to 2 conditions. 

The first is that the wireless device may not cause interference. The second is that the wireless device must accept any 

interference, including interference that may cause undesired operation of the device.

 CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in 

the 5.15 to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for the frequency 

range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. 

High-power radar is allocated as the primary user of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar 

stations can cause interference with and/or damage to this device.
The antennas for this device are not replaceable. Any attempt at user access will damage your computer.

AC adapter notices

 WARNING! To reduce the risk of electric shock or damage to the equipment: 

•Plug the AC adapter into an AC outlet that is easily accessible  

•Disconnect power from the product by unplugging the AC adapter from the AC outlet (not  

 

 

 by unplugging the AC adapter from the product).

 WARNING! To reduce potential safety issues, only the AC adapter provided with the product, a replacement AC 

adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the product.

Wireless Antennas

The wireless antennas transmit signals from the PC adapter to the TV adapter. These antennas are not visible from the 

outside of the adapters.

663694-001

Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.

© Copyright 2011 Hewlet -Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth 

in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an 

additional warranty. HP shall not be liable for technical and editorial errors or omissions contained herein.
First Edition: September 2011

NOTE: For optimal transmission, keep the areas 

immediately around the antennas free from 

obstructions.

With HP Wireless TV Connect, you can wirelessly stream high-definition 

multimedia content from your computer to your home entertainment 

center. Before setup, note the following configuration requirements:

• Your computer must have an available HDMI port and an available  

USB port.

• Your TV (or other external display) must have an available HDMI port.

NOTE: If the HDMI port on your TV is occupied with another device, consider using an 

HDMI switch purchased separately from an electronics retailer.

• For optimal performance, locate the TV adapter no further than 5 m (16.4 ft)  

from the PC adapter.

Before You Begin

*The reset button on the PC adapter is used only during a software upgrade, along with the Micro 

USB power port on the TV adapter.

 NOTE: You may need to upgrade the software on your adapter to ensure compatibility with 

devices produced by other manufacturers. When it’s available, you can download updated 

software with installation instructions from http://www.hp.com/support.

Connect the USB power cable to the PC adapter,  

and then connect the PC adapter and the USB power  

cable  to the computer. 

NOTE: The location of the computer ports may vary.

 

NOTE: If the PC adapter light does not turn on after inserting the adapter into the 

HDMI port on the computer, pull it out and reinsert it.

WIReleSS TV CONNeCT 

QuICk SeTuP

663694-001 Barbossa_v32.indd   1

9/1/2011   4:34:08 PM

Related Manuals for HP PC to TV Kits

0.533262s