HP Server tc2110 Installation Instructions

HP Servers Installation Instructions - Server tc2110.
Download
Page  of 1
4.4, 1709 votes
background image

DIMM 
Installation Instructions 
 

 

 

 

 

 

 

Installation Guidelines 

Some computers are equipped with an Advanced Memory Protection 
feature that enables the addition or replacement of memory while the 

computer is running. If your computer is equipped with this feature, 

see the documentation supplied with the computer for memory 
installation, replacement, and configuration procedures. 

  

  IMPORTANT:  This computer may not support mixing RDIMMs 

and UDIMMs. Attempting to mix these two types can cause the 
computer to halt during BIOS initialization. For more information, 
see the computer product documentation.  

  

 

Installing a DIMM 

  

  WARNING:  Turn off the computer and disconnect the power 

cord from the computer before installing the DIMM. Failure to do 
so can damage the equipment and expose you to the risk of 
electric shock. To reduce the risk of personal injury, allow the 
DIMMs to cool before removing them. 

  

  

  WARNING:  Always comply with all electrostatic and thermal 

guidelines to prevent bodily injury and ensure a properly 
functioning system when performing hot-plug operations. 

  

1. 

Back up all data, power down the computer, and then 

disconnect the computer from all electrical outlets. 

2. 

Access the DIMM slots. See the computer-specific 
documentation. 

Use a nonmagnetic-tip screwdriver to remove any screws. 

3. 

Open the DIMM slot latches. 

  

  CAUTION:  DIMMs are keyed for proper alignment. Align 

notches in the DIMM with the corresponding notches in the DIMM 
slot before inserting the DIMM. Do not force the DIMM into the 
slot. 

  

4. 

Insert the DIMM, applying equal pressure on both ends until 

the latches click into place. 

If the latches do not click into place, press them inward to 
secure the DIMM in the slot. 

 

5. 

Install all components removed to access the DIMM slots. 

6. 

Connect the computer to an electrical outlet. 

7. 

Power up the computer. 

The installation is complete. 

 

Troubleshooting 

For all troubleshooting issues during or after the memory installation 
process, see the computer-specific user documentation. 

For additional information about HP products, see the HP website 

(http://www.hp.com/support). 

 

© Copyright 2009 Hewlett-Packard Development Company, L.P. 

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty 

statements accompanying such products and services. Nothing herein should 

be construed as constituting an additional warranty. HP shall not be liable for 

technical or editorial errors or omissions contained herein. 

Part Number 284399-0 2 

March 2009 (First Edition) 

0

Related Manuals for HP Server tc2110

0.609476s