Kenmore Kenmore Elite Premiere Reverse Osmosis Drinking Water System Specifications
42-38556
Page 1 of 1
Kenmore Elite Premier Reverse Osmosis Drinking Water System
42-38556
• Reduces arsenic, lead, nitrates, cysts, sodium, chlorine,
sediment and other contaminants to improve the quality of
your drinking water*
• The faucet’s filter change indicator light monitors water quality
and eliminates the guess work by warning when filters or
membrane need to be changed
• The convenient “twist and pull” encapsulated filter design
makes filter changes easy, fast and sanitary—all without tools
or the associated mess
• “No mount” space-saving design allows for system placement
vertically or horizontally to fit easily under the sink
• The system’s extra-large storage tank ensures an ample
supply of filtered drinking water
01912
Due to Sears policy of continuous improve ment on its products, Sears reserves
the right to change materials and specifications without notice. Before installing,
consult installation instructions packed with product. For complete warranty
information, consult the owner’s manual or visit www.managemylife.com.
42-38556.PDF
Effective 03/19/12
Rev. 3
NSF® Certified.; the NSF (National Sanitation Foundation) is an independent national agency that establishes
standards by which water filtration products are manufactured and tested.
SELECTION
ELITE 42-38556
Faucet Included
Chrome
Membrane Monitor and Change Indicator
Electronic
Filter Monitor and Change Indicator
Timer
Automatic Operation
•
Easy “Twist & Pull” Filter Design
•
Easy “Guide” Filter and / or Membrane Design
•
Install From Above Faucet Design
•
Extra-Large Storage Tank
•
Easy Install Kit
•
Water Production, 24 Hrs. (Gallons)**
14.5
Storage Capacity (Gallons)
4.0
NSF® Certified.
•
Maximum Total Dissolved Solids (PPM)
2,000
Maximum Water Hardness @ 6.9 pH (GPG)
10
Maximum Iron, Manganese, Hydrogen Sulfide
0
Maximum Chlorine in Water Supply (mg / L)***
2
Prefilter (Sediment, Taste & Odor)
Activated Carbon
Postfilter (Sediment, Taste & Odor)
Activated Carbon
Supply Water Pressure Limits (PSI)
40 – 100
Supply Water Temperature Limits (F)
40 – 100
Supply Water pH Limits
4 – 10
Percent Rejection of Total Dissolved
Solids (Average)†
92.40%
Product Water Vending Flow (GPM)
1/2
Vertical or Horizontal Under-Sink Installation
•
Item Weight (Approx. Lbs.)
14
Shipping Weight (Approx. Lbs.)
15.3
ACCESSORIES
Filters and Membrane Included
•
Replacement Pre and Post Filters
(Lasts 6 Mos. / 900 Gal.)
42-38056
Replacement Membrane
3857705
Auxiliary Storage Tank (3.1 Gallon Capacity)
42-34707
WARRANTY
1-Year Limited Warranty –
Entire Appliance, Except Filter,
Filter Cartridge or Membrane
Parts & Labor
If used for other than private family purposes, warranty applies for only 90 days.
†New Membrane GPM = Gallons per minute PSI = Pounds per square inch
**Tested by NSF International according to NSF / ANSI standard 58 and 42.
*** A carbon prefilter is part of this system to protect the reverse osmosis membrane from
deterioration should there be chlorine in the supply water. This reverse osmosis system
contains a replaceable treatment component critical for effective reduction of TDS. The
product water shall be tested periodically to verify that the system is performing satisfactorily.
*Tested and certified by NSF
5 1/2"
11"
14"
14"
13"
Related Manuals for Kenmore Kenmore Elite Premiere Reverse Osmosis Drinking Water System
-
Kenmore Water Treaters Kenmore Extra High-Efficiency Water Softener Specifications
1 pages
-
Kenmore Water Treaters Kenmore High-Efficiency Water Softener Specifications
1 pages
-
Kenmore Water Treaters Kenmore Reverse Osmosis Drinking Water System Specifications
1 pages
-
Kenmore Water Treaters Kenmore Ultra High-Efficiency Water Softener Specifications
1 pages
-
Kenmore Water Treaters Kenmore Elite Advanced 2-Stage Drinking Water Filter Specifications
1 pages
-
Kenmore Water Treaters Kenmore Elite Hybrid Water Softener Specifications
1 pages