Netgear MP101 Quick Start Manual

Netgear Audio Quick Start Manual - MP101.
Download
Page  of 2
4.7, 1079 votes
background image

Start Here
Follow these instructions to set up your router.

Verify That Basic Requirements Are Met 
Assure that you have the following:

Network: A Wireless (802.11b or 802.11g) or Ethernet network

Computer: One or more computers running Windows 98SE, 2000, ME or XP

Have your Ethernet or wireless network settings handy.

First, Install the Music Player Software

Warning: PC firewall software can prevent the music server from communicating with
the MP101 Wireless Digital Music Player. Consult the server software online help for full
details about firewall settings.

1.

Power on your computer and log in as needed. 

2.

Insert the Wireless Digital Music Player Resource CD into your CD-ROM drive. The
CD main page will load. 

Install the MP101 server software to play music stored on your computers.

Install the RHAPSODY™ server software to take advantage of a 30-day free trial
to play music from their vast collection of recordings. 

3.

Follow the InstallShield Wizard steps, click Finish when done, and restart your 
computer as needed.

4.

Run the Netgear music server software and have it scan your hard drive to locate
your music files. Consult the Reference Manual on the Wireless Digital Music Player
Resource CD 
for full instructions on cataloging your collection of music in the server.

Next, Connect the MP101

Note: The MP101 will not work unless the music server you just installed or an Internet
service such as RHAPSODY sends it music.

1.

Connect the provided RCA cable from the MP101 Wireless Digital Music Player to
your audio system.

2.

Connect the MP101 to your network.

Note: The MP101 is set from the factory to automatically receive its network settings
via DHCP. If DHCP is not running on your network, you will have to set up the IP
address of the MP101 in the range of addresses on your network.

For Ethernet networks, connect via the Ethernet port.

For wireless networks, use the remote to browse the Network Setup menu to the
Wireless selection. Choose your wireless network and, if you are using WEP,
configure those settings.

Note: If the MP101 finds only one wireless network, it automatically selects that
one. Also, if the MP101 does not connect to a wireless network, you may have
to power cycle it before trying again. Refer to the troubleshooting tips in this
document or the Reference Manual on the Wireless Digital Music Player Resource
CD 
to resolve connectivity problems.

Play Music from Your PC or the Internet

1.

Once the MP101 is connected to your network, it will also connect to the music
server you installed earlier.

2.

Use the remote to navigate through the LCD menus to select music to play.

Installation Guide

AUX

DVD

VIDEO2

CD/SACD

MD/TAPE

VIDEO1

SPEAKERS

AC OUTLET

ANTENNA

DIGITAL

MP101 Wireless Digital Music Player

Receiver

Line
Out

Audio

Out

Ethernet

L

R

Digital Music Player MP101

SERIAL

Power

7.5VDC, 1.0A

Reset

MP101 Wireless Digital Music Player

Digital Music Player MP101

digital 5

MP101 Wireless Digital 
Music Player

Desktop PC 
with music files

WGT624 Wireless Firewall Router

Broadband
Modem

Internet

0.500710s