Netgear Push2TV - Wireless Display Adapter PTV3000-100NAS User's Manual

Netgear TV Video Accessories User's Manual - Push2TV - Wireless Display Adapter PTV3000-100NAS.
Download
Page  of 2
4.4, 2036 votes
background image

Installation Guide

Installation
To install and set up the Push2TV adapter with Intel WiDi:

1.    Connect the Push2TV adapter to your TV and plug in the power adapter.

The Push2TV adapter LED is blinking when the adapter powers up. The LED 
turns solid to indicate that the adapter is ready, but is not yet connected to your 
computer.

2.  Turn on your TV and select the correct TV input source for your TV. 

•    If you are not sure which input source to use, check the documentation that 

came with your TV set.

•    The Ready for Connection screen displays on your TV within 30 seconds.

If you do not see this screen, make sure that the TV input is set to the HDMI 
port where the Push2TV adapter is connected and all cable connections are 
firmly secured.

3.  On your laptop, launch the Intel Wireless Display software. There are two ways 

to launch the software
•    If your laptop has a 

 button or key, press it.

•    From Windows, select Start. In the search field, type Intel Wireless Display

Select and run the Intel Wireless Display software.

4.  Use the Intel Wireless Display software to scan and find the Push2TV adapter.

The screen on the right shows that the 

Intel Wireless Display software has found 

the wireless adapter.

5.  Double-click the detected Push2TV 

adapter to connect to it. 

6.  If you are connecting the laptop to the 

Push2TV adapter for the first time, the 

Push2TV adapter displays a 4-digit 

security code on the TV. Enter this 4-digit 

security code into the Intel Wireless 

Display software.

7.  Within a few seconds, the TV screen displays your laptop screen. The LED on 

the Push2TV adapter turns solid. 
You are now ready to use Push2TV for Intel Wireless Display.

Adjusting Your TV Display
You can adjust the image display on the TV screen:
•     To change how the image fits on the TV screen, on the Intel Wireless Display, 

click the Properties button. Then click the Resize TV picture button and adjust 

the picture using the plus or minus symbols. 

•     To remove black bars displayed on the sides of your TV screen, open the 

graphics properties and change the resolution to 1280x720. Changing the 

resolution might result in black bars on the laptop. To remove the black bars, 

open the graphics properties and clear the preserve aspect ratio check box. 

Push2TV Adapter for Wireless Display (PTV3000)

   Package Contents

   Push2TV Front and Back Views

USB power cable

Push2TV 
adapter

Power 
adapter

HDMI

LED

USB Power

Reset

Wireless 
Display 
Mode / 
WPS

Related Manuals for Netgear Push2TV - Wireless Display Adapter PTV3000-100NAS

0.497512s