RCA PSWTS6BRV User's Manual

RCA Surge Protectors User's Manual - PSWTS6BRV.
Download
Page  of 1
4.4, 2249 votes
background image

1.  Plug the surge protector into a grounded 3-prong outlet only.

2.  Plug all connected equipment directly into the surge protector.

User’s Guide

Connecting Equipment To Your 

RCA Surge Protector

 Power Connections (All Models)

      CAUTION! 

DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters. 
This surge protector is designed for indoor use only. Install the surge protector away from heat emit-
ting appliances such as radiators or heat registers. 

DO NOT install where excessive moisture is pres-

ent. 

DO NOT plug extension cords into the surge protector. Never install electrical or telephone wiring 

during a lightning storm.

 DO NOT USE FOR MEDICAL OR OTHER LIFE SUPPORT EQUIPMENT 

OR OTHER HIGH RISK ACTIVITIES.

RECEIVER

TV

VCR

DVD

AUDIO EQUIPMENT

GROUNDED

OUTLET

If your surge protector has phone jacks, pass the phone/fax/modem connection 

through the jacks on your surge protector as illustrated on the left. Most modem 

damage can be prevented if you connect the Phone/Fax/Modem through the surge 

protector.
1.  Connect the Phone/Fax/Modem line from your wall outlet to the 

INPUT jack on the 

surge protector.

2.  Connect the phone cord (provided) into the 

OUTPUT jack on the surge protector.

3.  Connect the other end of the phone cord to the Phone/Fax/Modem jack of the device 

you want to protect.

 Phone/Fax/Modem Connections (Some Models)

TELEPHONE

WALL JACK

CONNECT TO DEVICE'S

TELEPHONE JACK

IN

OUT

POWER

CORD

DEVICE

(receiver, computer, etc.)

If you are using a coax cable and your surge protector has coax jacks, pass the 

connection through the protected coax jacks on your surge protector. Most TV/VCR 

damage can be prevented if you connect the coax cable through the surge protector.
1.  Connect the Cable/Antenna line from your source to the 

INPUT jack on the surge 

protector.

2.  Connect the coax cable (provided) from the 

OUTPUT jack of the surge protector to 

the device you want to protect.

Indicator Lights (Some Models)
• Inmodelswitha“protected”light,thelightshouldbeonwhenthepowerswitch

is turned on. If this light goes out at any time, it means your surge protector has 

sacrificed itself to protect your equipment and should be replaced.

• Inmodelswitha“grounded”light,thelightshouldbeonwhenthepowerswitchis

turned on. If the light does not come on when you turn on the surge protector, you 

 Coax Cable Connections (Some Models)

CABLE/

ANTENNA

OUTLET

CONNECT TO

DEVICE'S COAX JACK

OUT

TV/VCR/CABLE DEVICE

IN

have a ground wiring problem and you should contact an electrician to properly ground the outlet. Connecting your surge 

protector to an improperly grounded outlet will void all Audiovox warranties.

• Inmodelswithapowerswitchlight,thelightinthepowerswitchlightswhentheunitispoweredon.Yoursurgeprotector

provides maximum surge protection even if the power switch is in the off position.

• SomemodelshaveaSurgeStat™indicator.Inthesemodels,theindicatorshowsthecurrentconditionofthesurgepro-

tector. If the Surge Stat™ indicator shows either Not Grounded or Exhausted, you need to take the appropriate action as 

described in the first two bullets above.

0.590574s