ReliOn BP200W Owner's Manual | Page 10

ReliOn Healthcare Owner's Manual - BP200W.
Download
Page  of 49
4.8, 1290 votes
background image

8

4. Using your blood pressure monitor for the first time

4.1. Inserting the batteries

After you have unpacked your device, insert the batteries. The battery
compartment is located on the underside of the device.

a) Remove the battery cover.

b) Insert the batteries (2 x size AAA 1.5 V), following the indicated polarity. 

c) If the battery warning appears in the display, the batteries are 

discharged and must be replaced with new ones.

Attention!
• Please use «AAA» Long-Life or Alkaline 1.5 V batteries.

4.2. Setting the date and time

1. After the new batteries are activated, the year number flashes in the

display. You can advance the year by pressing
the "M" button. To confirm and then set the
month, press the time button.

2. You can now set the month using the "M" but-

ton. To confirm and then set the day, press the
time button.

3. Please follow the instructions above to set the

day, hour and minutes.

4. Once you have set the last minute and pressed

the time button, the date and time are set and
the time is displayed.

5. If you want to change the date and time, press

and hold the time button down for approx. 3
seconds until the year starts to flash, then
release and press the time button again. The
year will now be flashing and you can enter the
new values as described above.

TIME     PM 

Memory 
Button

Time/Date
Button

0.466696s