Ryobi E49IR01 User's Manual

Ryobi Thermometer User's Manual - E49IR01.
Download
Page  of 2
4.3, 2132 votes
background image

Ø1 in.

@6 in.

Ø4 in.

@24 in.

Ø101.6 mm

@ 609.6 mm

Ø25.4 mm

@ 152.4 mm

C/F

X/= Mode

8 8 8 8  F

ftm23

º

SQ.

CU.

IR

HOLD

32.0 F

HOLD

IR

°

SQ.

CU.

ftm

23

WARNING!

Read and understand all instructions. Failure to follow all instructions 
listed below may result in electric shock, fire and/or serious injury.

WARNING: 

Use  of  controls  or  adjustments  or  performance  other  than  those 
specified herein may result in hazardous radiation exposure.

LASER RADIATION : AVOID DIRECT EYE EXPOSURE

RAYONNEMENT LASER  : ÉVITER LE CONTACT OCULAIRE DIRECT

RADIACIÓN LÁSER: EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS

MAXIMUM OUTPUT: <1.0 mW • WAVELENGTH : 630-660nm • CLASS II LAS ER PRODUCT

PUISSANCE MAX. : <1.0 mW • LONGUEUR D’ONDE : 650nm • PRODUIT LA SER DE CLASSE II

POTENCIA MÁX. <1.0 mW • LONG. ONDA: 650nm • APARATO LÁSER CLASE II

DANGER  •  DANGER  •  PELIGRO

E49IR01

Made in China  Fabriqué en Chine  Fabricado en China

Complies with CFR 1040.10

 & 1040.11

Avoid Exposure. Radiation is emit ed from this aperture. 

Éviter toute exposition. Le rayonnement est émis de cet e ouverture.

Evite la exposición. Se emite radiación a través de esta abertura.

Complies with / Convient aux pièces / Cumple con partes 21 CFR parts 1040.10 & 1040.11 

Avoid direct eye exposure when using the laser and do not project 
the laser beam directly into the eyes of others.
 Serious eye injury 
could result.

Do not remove or deface any prod uct labels. Removing product 
labels increases the risk of exposure to laser radiation.

Do not place the instrument in a position that may cause anyone 
to stare into the laser beam intentionally or unintention ally.
 Serious 
eye injury could result.

Do not operate the laser around children or allow children to oper-
ate the tool
. Serious eye injury could result. 

Do not use for medical evaluations or to measure body temperature. 
This product is meant for household use only. 

Do not use this product as a precision thermometer.

Do not operate the instrument in com bustible areas such as in the 
presence of flammable liquids, gasses, or dust.

Always ensure the laser beam is aimed at a surface without re-
flective proper ties.
 Shiny reflective materials are not suitable for laser 
use.

 

The laser shall be used and maintained in accordance with the 
manufacturer’s instructions.

 Neveraimthebeamatapersonorobjectotherthanthetarget

surface.

This  product  should  not  be  used  without  the  battery  cap  in-
stalled.

Handle the instrument with care. Treat it as you would any other 
optical device such as a camera or binoculars.

Avoid exposing the instrument to shock, continuous vibration, or 
extreme hot or cold temperatures.
 Damage to the product and/or 
serious injury to the user could result.

OPERATOR’S MANUAL
3-IN-1 INFRARED THERMOMETER, 
SONIC DISTANCE MEASURER, 
LASER POINTER
E49IR01

SPECIFICATIONS

Laser Certifications .................................................  <1mW, 630-660 nm
Display Auto Off ....................................................................... 3 minutes
Temperatrue Range ......................................................... -22ºF to 518º F
INFRARED THERMOMETER SPECIFICATIONS:
Accuracy ................................................................ -22º F to 30º F ± 5° F 

32° F to 518° F± 4° F 

Distance to Spot Ratio ...................................................................... 6 : 1
Operating Temperature..................................................... 32º F to 104º F
Temperature Update: ................................................................5 seconds
DISTANCE MEASURER SPECIFICATIONS:
Measurement Range .............................................................. 1 ft to 30 ft
Accuracy of Distance .......................................................

±0.5% ± 1 digit

OPERATION

The 3-in-1 Infrared Thermometer, Sonic Distance Measure, Laser Point 
takes non-contact temperature measurements and distance measure-
ments for electricians, facility maintenance personnel, HVAC applications, 
automotive applications, and more.
INSTALLING THE BATTERY
See Figure 1.
A 9 volt battery (included) must be installed before using the unit.

Slide the battery cover off.

Attach the battery terminals to their connectors on the unit.

Close the battery compartment by sliding the cover into place until it 
snaps closed.

TAKING TEMPERATURE READINGS
See Figures 2 - 4.
To obtain the most accurate readings, follow these instructions: 

Temperature readings can only be measured on a target surface.

Surfaces covered by frost, dirt, or other material should be cleaned 
before taking reading.

For highly  reflective  surfaces,  such  as  mirrors or windows, place  a 
piece of paper or tape on area where reading will be taken.

To take a temperature reading:

Press 

Power button (E) to turn on unit.

Press 

Mode button (F) to set unit to Infrared Mode, shown as IR (M) 

on LCD display 

(I).

Point the unit toward the area you wish to read and press the 

Measure 

button  (D).  See  Figure  4  to  determine  distance  to  spot  ratio  for 
accuracy of reading.

 

NOTE: The Laser pointer (A) will come on whenever Measure button (D) 
is pressed. The 

Laser pointer (A) indicates the center of the circular 

area being scanned for reference only.

The unit will take reading 

(L).

The surface temperature readings 

(L) are shown in LCD display.

When the 

Measure button (D) is released, the laser will turn off. The 

HOLD (O) icon will stay on until you turn unit off or another reading is 
taken.

To switch between Celsius to Fahrenheit units, press the 

ºC/Fº (units) 

button (H).

The unit will turn off in in 60 seconds if there is no operation or no key 
is pressed.

TAKING DISTANCE MEASUREMENTS
See Figures 2 - 3.
To  obtain  the  most  accurate  readings,  follow  these  instruc-
tions:
 The  LCD  display  shows  the  measurement  for  distance  (L) 
from the device to the target surface, with icons for calculations length 
(

), area (

)

 and volume (

(J).

Press 

Power button (E) to turn on unit.

Press 

Mode button (F) to set unit to Sonic mode (K), shown as 

 

on LCD display.

Measurements are calculated from the rear of the tool.

To  switch  back  and  forth  from  ft/in.  to  cm/m,  press  the 
ºC/Fº (Units) button (H)

Length (

) Measurement:

  Press the 

Measure button (D) to measure length (

(J).

  After  two  seconds  the  unit  will  display  the  result  of  the  length 

measurement 

(F).

Area (

) Measurement:

  Press the

 ( X/=) button (G) until the (

) (J) symbol is displayed.

  Press the 

Measure button (D) to take first length measurement.

  The unit will display the result of the length measurement.

  Reposition unit and take second length measurement.

  After  two  seconds  the  unit  will  display  the  result  of  the  area 

measurement.

Volume (

) Measurement:

  Press the 

( X/= ) button (G) until the (

) (J) symbol is displayed.

  Press the 

Measure button (D) to take first length measure ment.

  The unit will display the result of the length measurement.

  Reposition unit and take second length measurement.

  The unit will display the result of the area measurement.

  Reposition unit and take third length measurement.

  After  two  seconds  the  unit  will  display  the  result  of  the  volume 

measurement.

The unit will turn off in 60 seconds if there are no further operations or 
no key is pressed.

Fig. 2

J

L

P

G

E

C

A

I

B

D

F

Fig. 3

H

M

K

N

987000-814

8-31-09 (ReV:01)

ONE WORLD TECHNOLOGIES, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

Phone 1-800-525-2579

www.ryobitools.com

Ryobi® is a registered trademark of Ryobi Limited used under license.

LIMITED TWO YEAR WARRANTY AND 30 DAY EXCHANGE POLICY
30-DAY  EXCHANGE  POLICY:  
During  the  first  30  days  after  date  of 
purchasing this product, you may either request service under this war-
ranty or you may exchange it by returning it with proof of purchase and 
all original equipment packaged with the original product to the dealer 
from which it was purchased. The replacement product will be covered 
by the limited warranty for the balance of the two year period from the 
date of the original purchase.
LIMITED TWO YEAR WARRANTY. This product is warranted against all 
defects in workmanship or materials for a period of two years from the date 
of purchase. The warranty on any accessories for this product, excluding 
batteries, is limited to 90 days from the date the accessory is purchased. 
To obtain warranty service, call Customer Service at 1-800-525-2579 for 
warranty return instructions. The product must be properly packaged and 
returned with all equipment that was included with the original product. 
When you request warranty service, you must also present proof of pur-
chase documentation, which includes the date of purchase (for example, 
a receipt or a bill of sale). Defective products returned within the warranty 
period will be repaired or replaced, at our option, free of charge, within 
ninety (90) days or less. The cost of shipping the product to us is your 
responsibility. This warranty only covers defects arising under normal us-
age and does not cover any malfunction, failure or defects resulting from 
misuse, abuse, neglect, alteration, modification or unauthorized repairs. It 
applies only to the original purchaser at retail, and may not be transferred. 
One World Technologies, Inc. makes no warranties, representations or 
promises  as  to  the  quality  or  performance  of  this  product  other  than 
those specifically stated in this warranty. Any implied warranties granted 
under state law, including warranties of merchantability or fitness for a 
particular purpose, are limited to two years from the date of purchase. 
One World Technologies, Inc. is not responsible for direct, indirect, or 
incidental damages Some states do not allow limitations on how long 
an implied warranty lasts, or the exclusion or limitation of incidental or 
consequential damages, so the above limitations and exclusions may not 
apply to you. This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

Fig. 4

O

WARRANTY

Fig. 1

A - 9V battery (Pile de 9 V, batería de 9 

V)

B - Battery cover (couvercle du compar-

timent de la batterie, tapa de la bat-

ería)

C - Battery terminals (bornes de batterie, 

terminales de la batería)

A

B

C

A - Laser  beam  (faisceau  laser  ,  rayo 

láser )

B - Sonic beam (faisceau sonique, rayo 

sónico)

C - Infrared beam (faisceau à infrarouge, 

rayo infrarrojo)

D - Measure button (bouton « measure 

» (mesure), botón de medición)

E - Power  button  (bouton  «  power  » 

(marche/arrêt), botón de encendido)

F - Mode  button  (bouton  «  mode  » 

(mode), botón modo)

G - (X/=) button [bouton « (X/=) », botón 

(X/=)]

H - ºC/Fº (units) button [bouton « ºC/Fº » 

(Unités), botón ºC/Fº (unidades)]

I  - LCD display (afficheur ACL, pantalla 

de LCD)

J - Length,  area,  volume  icon  [icône  « 

length » (longueur), « area » (aire) et 

« volume » (volume), Ícono de longi-

tud, área y volumen]

K - Sonic  icon  (icône  «  sonic  »  (so-

nique), ícono sónico)

L - Reading (lecture, medición)

M- Infrared icon (icône « infrared » (in-

frarouge), Ícono infrarrojo)

N - Laser  icon  (icône  «  laser  »  (laser), 

Ícono láser)

O - Hold icon (icône « hold » (retenue), 

ícono mantener)

P - Battery charge icon (icône « battery 

charge  »  (charge  des  piles),  ícono 

del cargador de la batería)

0.661249s