Sanyo Vcc-4344 User's Manual

Sanyo Home Security System User's Manual - Vcc-4344.
Download
Page  of 2
4.3, 2410 votes
background image

INSTRUCTION MANUAL

VCC-4344

(Warranty attached)

COLOR CCD camera

About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.

 

Dimensions: mm

Safety Guard

This installation should be made by a qualified service person and should 
conform to all local codes.

Depending on the conditions of use, installation and 
environment, please be sure to make the appropriate settings 
and adjustments. If you need help with installation and/or 
settings, please consult your dealer.

136

126.5

1

25.2

11

15.4

1/4”–20 UNC

28

67

54

INFORMATION TO USER

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT 
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE 
LITERATURE ACCOMPANYING THIS UNIT.

WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour la clientèle canadienne
Cet appareil numerique de la Classe B est conforme a la norme NMB-003 
du Canada.

This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful 

interference in a residential instal ation. This equipment generates, uses, and 

can radiate radio frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of 

the following measures:
 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference 

that may cause undesired operation.
Changes or modifications not expressly approved by Sanyo may void the user's 

authority to operate this camera.

J

In case of problem

Do not use the camera if smoke or strange odors come from the 
unit, or if it seems not to function correctly. Disconnect the power 
cord immediately, and consult your dealer or a Sanyo Authorized 
Service Center. 

J

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause 
damage to the unit. For internal settings and repairs, consult your 
dealer or a Sanyo Authorized Service Center.

J

Do not put objects inside the unit

Make sure that no metal objects or flammable substances get 
inside the camera. If used with a foreign object inside, it could 
cause fire, short-circuits or damage. If water or liquid gets inside the 
camera, disconnect the power cord immediately, and consult your 
dealer or a Sanyo Authorized Service Center. Be careful to protect 
the camera from rain, sea water, etc.

J

Be careful when handling the unit

To prevent damage, do not drop the camera or subject it to strong 
shock or vibration.

J

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor, 
transformer, or audio speakers, the magnetic field they generate 
will distort the image.

J

Protect from humidity and dust

To prevent damage to the camera, do not install it where there is 
greasy smoke or steam, where the humidity may get too high, or 
where there is a lot of dust.

J

Protect from high temperatures

Do not install close to stoves, or other heat generating devices, 
such as spotlights, etc., or where it could be subject to direct 
sunlight, as that could cause deformation, discoloration or other 
damage.
Be careful when installing close to the ceiling, in a kitchen or boiler 
room, as the temperature may raise to high levels. Install where the 
temperature range will stay between -10

°C (14°F) and 50°C 

(122

°F). (no condensation)

J

Cleaning

 

Dirt can be removed from the cabinet by wiping it with a soft cloth. 

To remove stains, use a soft cloth moistened with a soft detergent 
solution and wrung dry, then dry by wiping with a soft dry cloth.

 

Do not use benzine, thinner or other chemical products on the 

cabinet, as they may cause deformation and paint peeling. Before 
using a chemical cloth, make sure to read all accompanying 
instructions. Make sure that no plastic or rubber material comes 
in contact with the cabinet for extended periods, as that may 
cause damage or paint peeling.

Printed on recycled paper

1AC6P1P2705--
L5AN4/US (0307TR-SY)

PRECAUTIONS

SANYO Electric Co., Ltd.
Printed in Japan

POWER (power indicator)

Lights when the camera power is ON.

VIDEO OUT (video output terminal: BNC connector)

Connects to the VIDEO IN (video input) terminal on the VCR or monitor.

CONTROL (Manual color/black and white setting terminal)

 

G (ground) terminal

 

C (color) terminal

 

B (black and white) terminal

LINE PHASE (Line phase adjustment volume)

When using two cameras or more, the image on the monitor may roll 

vertically when switching sources. This rolling can be minimized by turning 

this volume.

GND, AC24V, DC12V (ground terminal, 24V AC or 12V DC input 
terminal)

Camera adjustment/setting panel

Contains camera adjustment dials and setting switches.

LENS (lens iris output terminal)

Used to connect the lens plug when the lens is attached.

c Brake coil (-)

d Brake coil (+)

e Drive coil (+)

f Drive coil (-)

Flange-back adjustment lever

Flange-back lock screw

Lens cap

Protects the lens from damage.

Camera installation bracket

The bracket can be secured at the top or bottom of the camera. When 
securing the bracket, use the long screws and use the short screws on the 
opposite side to seal the openings.

c Short screws: M3 x 4

d Long screws: M3 x 6

e Camera mounting screw hole: 1/4”-20 UNC

When installing the camera support, select a location that can support the 
total weight of the camera and accessories.

Q

 Attaching the lens

Use a DC type auto-iris lens (sold separately).

 

Do not use a lens if length “L” is more than 5 mm. 
Otherwise, it may damage the camera and prevent 
proper installation.

 

When attaching a C mount lens, attach the lens to the 
camera after inserting the C mount ring (option).

Remove the lens mount 

cap from the camera.

Install the auto-iris lens.
Connect the lens plug to 

the lens iris output 
connector (LENS) on the 
side of the camera.

NAMES AND FUNCTIONS OF PARTS

G C B

L

1

2

CS mount type lens

3

Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your 
place of purchase or a Sanyo Authorized Service Center.

J

If no image appears

 

Is the coaxial cable attached securely?

 

Are the power and voltage normal?

 

Has the iris of the lens inside the camera been adjusted correctly 

(with the iris dial)?

 

Is there adequate illumination?

J

If the image is unclear

 

Is the lens in focus?

 

Is the lens dirty?

Dirt or fingerprints on the lens can adversely affect the image. 
Gently wipe any dirt or fingerprints off the lens with a soft cloth or 
lens cleaning paper and cleaning fluid (commercially available).

 

Is the monitor adjusted correctly?

The camera is a precision instrument. Handle it carefully and 
always follow the safety precautions. If the camera requires service, 
never try to repair it yourself or open the casing.
For servicing, maintenance, or repairs, contact your place of 
purchase or a Sanyo Authorized Service Center.

Appearance and specifications are subject to change without prior notice.

TROUBLESHOOTING

SERVICE

SPECIFICATIONS

Scanning system

: NTSC standard TV system 

(525 TV lines, 30 frames/sec.)

Interlace

: PLL 2:1 interlace

Image device

: 1/4 inch solid state image device CCD

Picture elements

: 537 (H) x 505 (V)

Effective picture 
elements

: 510 (H) x 492 (V)

Synchronizing system : Internal sync, Line lock manually switchable
Resolution

: 350 TV lines horizontally (color mode),

380 TV lines horizontally (B/W mode),
350 TV lines vertically

Video output level

: 1.0 Vp-p/75 ohms, composite

Video S/N ratio

: More than 48 dB

Minimum required 
illumination 
(incandescent lighting)

: Approx. 0.05 lux with a F 1.2 lens (B/W mode),

Approx. 0.9 lux with a F 1.2 lens (color mode),
Approx. 0.02 lux with a F 1.2 lens (B/W mode, Gain: HI)

Day/Night

: AUTO/MANUAL (at CONTROL terminal)

Control terminal

: Manual color/black and white setting

Backlight 
compensation

: MULTI/OFF switching

CENT/OFF switching
(Active when using an auto-iris lens)

Iris function

: EI/AI switching

Auto-iris lens output

: DC output (variable DC level), 4-pin terminal

Electronic iris range

: 0.9 lux to 45000 lux (F 1.2 lens: color mode)

Flange-back

: 12.5 mm ±0.5 mm

White balance

: ATW/Manual switching

Gain up

: HI (high)/ NOR (Normal) switching

Lens mount

: CS mount

Environmental 
conditions

: Temperature: -10°C – +50°C

Humidity: less than 90% (no condensation)

Power supply

: 12 – 15 VDC/24 VAC, 60 Hz (±10%)

Power consumption

: 3.2 W (with auto iris lens)

Weight

: Approx. 430 g (without lens)

e_l5an4_us.fm  Page 1  Wednesday, July 16, 2003  5:37 PM

Related Manuals for Sanyo Vcc-4344

0.629237s