Sunbeam 000938-511-000 Owner's Manual

Sunbeam Appliances Owner's Manual - 000938-511-000 .
Download
Page  of 2
4.3, 2095 votes
background image

HOW TO USE YOUR HEATING PAD

Make sure Control Connector is securely connected to the Pad Connector (Figure 1).

Push both parts together for a tight fit. NOTE: control must be connected to heating pad before 

plugging unit into outlet. 

1.  After control is connected to pad, plug into 120V AC 

electrical outlet.

2.  To turn pad on, press Push-Button. Your heating pad will 

NOT turn on until you press the Push-Button. NOTE: If the 

heat level indicators do not light up or stay on,the plug 

or Control Connector may not be firmly and completely 

connected. Unplug from wal  outlet, check the pad 

connection again and re-plug into outlet.

3.  Al ow pad to preheat for several minutes. NOTE:  

Your heating pad has been designed to meet the maximum 

heat output according to UL Standards.

4.  Select from 4 heat settings by pressing Push-Button successively  

to achieve desired heat level.  

To turn the pad OFF, you must scrol  through  

the remaining heat settings by pressing the Push-Button 

sequential y. 

5. DO NOT SIT ON OR AGAINST OR CRUSH PAD – AVOID FOLDING DURING USE.

6. DO NOT USE WHILE SLEEPING.

7. SEE ADDITIONAL WARNINGS.
AUTO-OFF FEATURE

Your heating pad control er includes an Auto-Off feature. This feature is designed to conserve 

energy by automatical y turning off after 2 hours of continuous use. NOTE: After a power outage, 

the Auto-Off feature automatical y resets the timer. 
USING MOIST HEAT THERAPY

In some cases, you may find that moist heat therapy provides more comfort and relief. When 

using moist heat therapy, you should protect furniture and clothing from 

becoming damp.

1.  Dampen either side of the heating pad with water by patting the surface 

with a wet sponge or cloth or use a spray bottle to apply a fine mist. Do 

not thoroughly soak pad.

2.  Do not spray or dampen the pad connector. (Figure 2).
DANGER: Do not immerse the pad or pad connector in water  

or place under running water. Failure to comply may result in  

product failure and/or personal injury.

NOTE: The electrical pad connector must be thoroughly dry before  

establishing electrical connection.
WASHING INSTRUCTIONS 

DO NOT DRY CLEAN! DO NOT USE BLEACH!

DO NOT USE WRINGER FOR DETACHABLE PAD!

1. Disconnect pad from outlet.

2.  Detach Pad Connector from Control Connector.

3.  Wash by hand or as fol ows in automatic washer using slow agitation and normal spin speed: 

Fil  washer with warm water. Add minimum amount of al -purpose detergent, agitate to 

dissolve, measure heating pad before washing. Add heating pad and soak five minutes. Agitate 

two minutes. Spin. Fil  for cool rinse, agitate one minute then spin. Tumble dry in medium heat 

in automatic dryer, for five minutes only, or line dry. Remove damp heating pad from dryer, 

stretch to original size, and drape to finish drying. Do not iron your heating pad.

4. Do not plug in pad and pad connector until they are completely dry.

IMPORTANT SAFETY 

INSTRUCTIONS 

DO NOT DESTROY

DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, 

FIRE, AND PERSONAL INJURY, THIS PRODUCT MUST BE USED IN 

ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:

1.  READ ALL INSTRUCTIONS

2.  DO NOT USE WHILE SLEEPING.

3.  DO NOT USE ON AN INFANT OR ON AN ANIMAL.

4.   THIS PAD IS NOT TO BE USED ON OR BY AN INVALID, HELPLESS, A 

SLEEPING OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, 

OR A PERSON WITH POOR BLOOD CIRCULATION.

5.  DO NOT USE ON AREAS OF INSENSITIVE SKIN.

6.   BURNS CAN OCCUR REGARDLESS OF HEAT CONTROL SETTING. 

CHECK SKIN UNDER PAD FREQUENTLY.

7.  DO NOT USE IN AN OXYGEN ATMOSPHERE.

8.   DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS 

PAD IN PLACE.

9.   DO NOT BUNCH, SIT ON OR AGAINST OR CRUSH PAD-AVOID 

SHARP FOLDS.

10.  NEVER PULL THIS PAD BY THE SUPPLY CORD.

11.  DO NOT USE THE CORD AS A HANDLE.

12.   THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT ADULT 

SUPERVISION.

13.   PLACE PAD ON TOP OF AND NOT UNDER THE PART OF THE BODY 

NEEDING HEAT.

14.   USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT. UNPLUG 

WHEN NOT IN USE.

15.  DO NOT TAMPER WITH THIS PAD IN ANY WAY. 

16.   THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON 

THIS PAD DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY 

FOR CONSUMER SERVICE INFORMATION.

17.   DO NOT USE THIS PAD WITH LINIMENT, SALVE OR OINTMENT 

PREPARATIONS, ESPECIALLY ONES THAT CONTAIN HEAT-

PRODUCING INGREDIENTS. SKIN BURNS COULD RESULT.

18.   DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD  

IS DAMAGED.

19.   NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY IF 

CHILDREN ARE PRESENT.

20.   LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING MAY 

DAMAGE CORD AND INTERNAL PARTS.

21.   WHEN NOT IN USE, STORE THE HEATING PAD IN THE ORIGINAL 

PACKAGING, IN A DARK, COOL, DRY PLACE.

22.  SAVE THESE INSTRUCTIONS.
This appliance has a polarized plug (one blade is wider than the 

other). This plug fits a polarized outlet only one way; if the plug does 

not fit ful y into the outlet, reverse the plug. If it stil  does not fit, 

contact a qualified electrician.
DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE. 

1. Control Connector
2. Pad Connector
3. Locking Clips

Fig. 1

5-YEAR LIMITED WARRANTY

Sunbeam  Products,  Inc.  doing  business  as  Jarden  Consumer  Solutions  or  if  in  Canada,  Sunbeam  Corporation  (Canada) 

Limited doing business as Jarden Consumer Solutions (col ectively “JCS”) warrants that for a period of five years from the 

date of purchase, this product wil  be free from defects in material and workmanship. JCS, at its option, wil  repair or replace 

this product or any component of the product found to be defective during the warranty period. Replacement wil  be made 

with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a 

similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or 

mechanical functions on this product. Doing so wil  void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep 

the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or 

retail stores sel ing JCS products do not have the right to alter, modify or any way change the terms and conditions of this 

warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the fol owing: negligent use or misuse of 

the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration 

by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as 

fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability? 

JCS shal  not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory 

warranty or condition. 

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular 

purpose is limited in duration to the duration of the above warranty. 

JCS disclaims al  other warranties, conditions or representations, express, implied, statutory or otherwise. 

JCS shal  not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the 

product  including  incidental,  special,  consequential  or  similar  damages  or  loss  of  profits,  or  for  any  breach  of  contract, 

fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not al ow the exclusion or limitation of incidental or consequential damages or 

limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state 

to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service 

In the U.S.A. - If you have any question regarding this warranty or would like to obtain warranty service, please cal   

1-800-458-8407 and a convenient service center address wil  be provided to you. 

In Canada - If you have any question regarding this warranty or would like to obtain warranty service, please cal   

1-800-667-8623 and a convenient service center address wil  be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in 

Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as 

Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or 

claim in connection with this product, please write our Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE. 

©2011 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. Al  rights reserved. Distributed by Sunbeam 

Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Printed in the China 

GCDS-SUN23807-PH 

P.N. 137116-2

www.sunbeam.com

Moist / Dry ChoiceTempTM Heating Pad 

Model 938

Figure 2

SB-938_HeatPad_11ESM1.indd   1

12/15/11   8:19 AM

Related Manuals for Sunbeam 000938-511-000

0.584064s