Toshiba Electric Heater E-STUDIO1355 Service Manual

Toshiba Electric Heater Service Manual - Electric Heater E-STUDIO1355.
Download
Page  of 3
4.2, 2318 votes
background image

Overview 

Corrections are needed to the “Connecting the Tray Heaters” section of the e-STUDIO1355 
Series Service Manual. 

Detail 

Please download the corrected manual or store the following corrections with your service 
manual.  The corrected manual is version 00a or later, posted on 3/25/2011. (Corrections are in 
red) 

Location of the Incorrect Description 

Installation Main Machine Installation Connecting the Tray Heaters of the Main Machine 
(pages 54 ~ 56 in the e-STUDIO1355 Series Service Manual v00) 

Corrected Text 

Connecting the Tray Heaters of the Main Machine 

The machine comes from the factory without the tray heaters already installed but 
disconnected
.  Tray heater installation is optional. The heaters should be connected if the 
location has high humidity. 

Consult with the customer before connecting the tray heaters. 

Doing this procedure connects the following anti-condensation heaters inside the main machine 
at the following locations: 

  One unit below the transfer unit (if installed) 

  Two units in the paper tray unit (if installed) 

  One unit in the scanner unit (if installed) 

  One unit in the LCIT (if installed) 

Copier Bulletin:  TSB-1078 
Date:    

4/8/2011 

Page:    

1 of 3 

Models:  

e-STUDIO1355 Series 

Subject:  Service Manual Correction 

– Tray Heaters 

 

Copyright-2009 Toshiba America Business Solutions, Inc. (TABS).  This publication contains proprietary and confidential 
information retained for reference purpose by authorized TABS dealers.  Unauthorized use of this information is prohibited.  
TABS makes no express or implied warranty, including implied warranties of merchantability for a particular purpose, with regard 
to this technical publication and disclaims any claim arising by reason of the possession or use thereof.

 

 

0.478082s