Troy-Bilt 41 AM079G063 User's Manual | Page 5
5
(continued)
• Do not use the cutting blade for edging or as an
edger, severe personal injury to yourself or others
can occur. Use the cutting blade only for the purpose
as described in this manual.
• Stop the engine IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect thor-
oughly for loose nuts, bolts or damage before contin-
uing. Repair or replace affected parts as necessary.
AFTER USE
• Clean cutting blades with a household cleaner to
remove any gum buildup. Oil the blade with machine
oil to prevent rust.
• Lock up and store the cutting blade in an appropriate
area to protect the blade from unauthorized use or
damage.
SAVE THESE INSTRUCTIONS
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL
MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning, or caution. May be used in conjunction with other
symbols or pictographs.
• WARNING - READ OPERATOR'S MANUAL
Read the Operator’s Manual(s) and follow all warnings and safety instructions.
Failure to do so can result in serious injury to the operator and/or bystanders.
• FOR SERVICE INFORMATION, CALL:
USA: 1-800-345-8746
CANADA: 1-800-668-1238
• WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing
loss. Wear eye protection meeting ANSI Z87.1 standards and ear protection when
operating this unit.
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders, especially children and pets, at least 50 feet (15 m)
from the operating area.
• THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY
WARNING: Do not operate without the cutting attachment shield in place.
Keep away from the rotating cutting attachment.
• HOT SURFACE WARNING
Do not touch a hot muffler, gear housing or cylinder. You may get burned. These parts
get extremely hot from operation. When turned off they remain hot for a short time.
• SHARP BLADE
WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not
touch line cutting blade.
Related Manuals for Troy-Bilt 41 AM079G063
-
Husqvarna Brush Cutter 132R User's Manual
36 pages
-
Husqvarna Brush Cutter 128R User's Manual
27 pages
-
Husqvarna Brush Cutter 143R-II User's Manual
36 pages
-
Husqvarna Brush Cutter 125R User's Manual
28 pages
-
Husqvarna Brush Cutter 323R User's Manual
44 pages
-
Ariens Brush Cutter 946150 ST622 CARB User's Manual
21 pages
-
Homelite Brush Cutter F3040 User's Manual
22 pages
-
Homelite Brush Cutter F3055 User's Manual
22 pages
-
Homelite Brush Cutter UT20707 User's Manual
18 pages
-
Makita Brush Cutter RST250 User's Manual
43 pages
-
Woods Equipment Brush Cutter BATWING BW180-3 User's Manual
76 pages
-
Woods Equipment Brush Cutter DS96 User's Manual
78 pages
-
Black & Decker Brush Cutter GH900 User's Manual
10 pages
-
Tanaka Brush Cutter TBC-160 User's Manual
17 pages
-
Tanaka Brush Cutter TBC-215 User's Manual
17 pages
-
Tanaka Brush Cutter TBC-232 User's Manual
20 pages
-
Tanaka Brush Cutter TBC-240 User's Manual
18 pages
-
John Deere Brush Cutter HX10 User's Manual
2 pages
-
John Deere Brush Cutter CX15 User's Manual
3 pages
-
Stiga Brush Cutter SB 22 User's Manual
2 pages
-
Stiga Brush Cutter SB 32 D User's Manual
2 pages
-
Honda Brush Cutter UMK422 User's Manual
56 pages
-
Honda Brush Cutter UMK431 User's Manual
56 pages
-
Ryobi Brush Cutter SS30 User's Manual
26 pages