Yamaha DSP1D Installation Manual

Yamaha Network Card Installation Manual - DSP1D.
Download
Page  of 4
4.1, 1900 votes
background image

Optional Boards

for

DSP UNIT

Thank you for choosing the board for Yamaha DSP1D (DSP unit).

Ask an authorized Yamaha service engineer to install the board. Do not install the board yourself.

この度はヤマハ DSPユニットDSP1D用ボードをお買上げいただき、ありがとうございます。

ボードの取付けは、必ずヤマハサービスエンジニアにご依頼ください。お客様ご自身では行なわないでください。

The following items are optional boards available for the DSP1D.
DSP1D用にオプションでお求めいただけるボードは次のとおりです。

INPUT DSP BOARD

インプット DSPボード

IDB1D

CONSOLE INTERFACE BOARD

コンソールインタフェースボード

CIB1D

ENGINE MANAGEMENT BOARD

エンジンマネージメントボード

EMB1D

PATCH DSP BOARD

パッチDSPボード

PDB1D

GROUP DSP BOARD

グループDSPボード

GDB1D

EFFECT DSP BOARD

エフェクトDSPボード

EDB1D

■ Installing the board (For only an authorized Yamaha service engineers)

ボード装着手順(ヤマハサービスエンジニア用)

Before installing the board, be sure to turn off the power to the DSP1D and disconnect the power cord.
You need to remove the front cover of the DSP1D to install any board. To install the PDB1D board, you also need to remove the
left side cover.

ボードの装着作業は必ずDSP1D の電源スイッチを切り、電源コードを抜いてから行なってください。

パッチDSPボード PDB1D以外のボードの装着はユニット正面のカバーを取りはずして行ないます。PDB1Dボードの装着はさらにユニット
左側面カバーのとりはずしが必要です。

1. Remove ten screws as

shown in the picture. Do
not remove any other
screws. Keep the re-
moved screws in a safe
place since you will need
them to re-attach the
cover.

2. As shown in the picture,

remove the cover by
opening from the right
side to avoid damage to
the hardware on the left
side of the rack.

10ヶ所のネジをはずします。写

真に示した以外のネジははずさ

ないでください。

また取りはずし

たネジはカバーを再び取り付け

る際、必要ですので紛失しない

でください。

正面カバー
front cover

左側ラック金具
hardware on the left side of the rack

左側ラック金具を破損しないよ

う写真のように正面カバーを右

側から先に開けて取りはずしま

す。

0.493578s