Yamaha Marine Sanitation System A3000 User's Manual

Yamaha Marine Sanitation System User's Manual - Marine Sanitation System A3000.
Download
Page  of 17
4.5, 1238 votes
background image

 

y  A3000 Professional Sampler:  Power User 
 

Introduction 

The A3000 signals Yamaha’s re-entry into the professional sampler market.  It is a very 

powerful, very easy to use sampler.  The first part of this power user wil  address many of 

the important features available with the Version 1.2 software.  The second part will 
address features introduced with Version 2 software.   

 

This article will address each particular screen via its mode, function and page as follows:  
[MODE]: [FUNCTION]: [Page]. This means you can navigate to the very page or screen by 

pressing the MODE button first, followed by the FUNCTION Key, then via turning Knob #1 

you can navigate to the particular screen in question. Knob 1 is the navigation knob, and 
turning it will take you through the various pages of a particular Function.  Each page is 

identified in the lower left corner of the screen. 

 
When the up/down arrows appear in the lower left of the screen just above the first knob 

it  means  that  Knob  1  can  be  turned  to  select  additional  pages.  A  single  down  arrow 

indicates that you are at the top of the list and you can turn the knob clockwise to see 
the other pages; a single up arrow indicates the bottom of the list and a 

counterclockwise turn is available to take you back up the list; both an up and down 
arrow indicate pages in both directions. Alternatively, successive presses of the selected 

Function key (red LED is lit) can navigate forward through the pages, while pressing the 

green Mode LED in question, will take you backward through the pages. Unlike Knob 1, 
both the Function key and the Mode LED will wrap around as they scroll through the 

page screens.   

 
The Knobs will increment if you turn them one click and will travel a further distance with 

speed. You will find that the longer you are in contact with the Knob during a turn, the 

farther it goes. If you use a technique of short and very fast turns, you will no doubt 
frustrate yourself (spinning your wheels, so to speak). Maintain contact through your turn 

and you will be more efficient.  

Basic A3000 Terminology 

 
The basic A3000 recording is called a Sample. On most conventional samplers, a 

“sample’ is waveform data only. An A3000 ‘sample’ contains information like its key 

mapping, MIDI channel, filter, envelope, LFO and MIDI channel.  In addition, each 
sample has its own sweepable parametric EQ (32Hz-16kHz). Samples can be (if it is 

convenient) grouped into objects called  sample banks.  Samples in the same bank can 

be treated as a single sample. This is great for multisampled instruments like pianos, drum 
kits or a map of beats where you want to treat a group of samples all together instead of 

repeating the same operation to each sample. If you need to edit samples within a 
sample bank the A3000 provides for a method to do this, easily. (See “Editing Samples 

Within a Sample Bank” section below).  

 
Next up the food chain is a Program.  A Program is an organization of samples and 

related settings into a playable sound or set of sounds. In fact, you do not play samples 

directly—you play samples that have been placed into a Program. In a Program you can 
make any number of the samples (or sample banks) active by simply turning on the 

“ToPgm” (To Program) switch for that sample (or sample bank). When you select  [PLAY]: 

Related Manuals for Yamaha Marine Sanitation System A3000

0.489854s